LED Indicators
The Operator's Panel includes four LED indicators that provide a variety of information as detailed in the following table:
Table 2 LEDs
LED | Color | Description |
|
|
|
Ready/Activity | Green | Illuminated when power is on. Blinking whenever there is |
|
| tape drive or autoloader robotics activity. |
|
|
|
Clean Drive | Amber | Illuminated when the tape drive needs to be cleaned. |
|
| Indicates that 250 tape motion hours have passed since |
|
| the last cleaning. The LED turns off when cleaning is |
|
| successfully completed. See Cleaning the Tape Drive on |
|
| page 36. |
|
|
|
Media Attention | Amber | Illuminated if a |
|
| offending cartridge will also show a “!” in the cartridge |
|
| inventory display for the corresponding slot. |
|
| This condition can be the result of: |
|
| ■ faulty or improperly degaussed media |
|
| ■ media that has been previously written in an invalid |
|
| format such as DLT 7000 or DLT 8000 |
|
| ■ dirty read/write heads in the tape drive |
|
| ■ an invalid cartridge (DLTtape III or |
|
| inserted |
|
| If these symptoms occur on multiple known good |
|
| cartridges, consider cleaning the tape drive. See Cleaning |
|
| the Tape Drive on page 36. If a particular cartridge |
|
| causes these symptoms repeatedly, that cartridge may be |
|
| defective or invalid, and should be discarded. |
|
|
|
Error | Red | Illuminated if an unrecoverable tape drive or autoloader |
|
| error occurs. A corresponding error message appears on |
|
| the LCD screen. For more information, see Diagnostics and |
|
| Troubleshooting on page 51. |
|
|
|
26 Operating the Autoloader | Chapter 2 |
