HP vs80 Note, Note, upgrade tape, Importing Cartridges, the cartridge will be exported, and the LCD will display Bad

Note	If the cartridge is not a valid code update cartridge, the LCD will
	temporarily display error code “BC,” the autoloader will reset,
	the cartridge will be exported, and the LCD will display Bad
	upgrade tape.

7.During the firmware update, which can take several minutes, the LCD screen displays CODE UPDATE IN PROGRESS. When firmware update is complete, the autoloader resets, then unloads and exports the code update cartridge. When the LCD screen prompts you, remove the code update cartridge and press the [Enter] button to close the door.

8.If you exported a data cartridge to make room for the code update cartridge, be sure to import the cartridge to its original slot. See Importing Cartridges on page 30 for instructions.

Note	After a firmware update, the firmware revision displayed on the
	LCD will not be updated until the autoloader is power cycled.

Chapter 3 Autoloader Administration 47