Figure 13 Exporting a Cartridge

Loading Cartridges

This option loads a cartridge from the autoloader carousel into the tape drive.

To use this option, follow these steps:

1.From the Home Screen or main menu, press the [+] or [-] button until Commands appears on the top line of the LCD screen. Press [Enter] to select.

2.Press the [+] or [-] button until Load Cartridge appears on the LCD screen.

3.Press the [Enter] button to select.

4.Press the [+] or [-] button until the desired slot number appears on the LCD screen and press the [Enter] button. The slot number you select indicates the cartridge to be loaded into the tape drive.

Note Only slot numbers that contain cartridges are displayed.

5.Status messages will be displayed while the cartridge is loading. Drive Stopped will be displayed when the operation is complete.

6.Press the [Cancel] button to return to the Home screen when you are done loading cartridges.

32 Operating the Autoloader

Chapter 2