Autoload Mode

Note

Autoload mode is only applicable if the autoloader is in

 

Sequential mode.

 

 

This option turns Autoload mode on or off. When the autoloader is powered on and Autoload mode is on, the autoloader automatically loads the cartridge from the lowest numbered full slot into the tape drive. When Autoload mode is off, no cartridges are automatically loaded at power on.

To access this option, follow these steps:

1.From the Home Screen or main menu, press the [+] or [-] button until Configuration appears on the top line of the LCD screen.

2.Press the [Enter] button to select.

3.Press the [+] or [-] button until Autoload Mode appears on the LCD screen. The second line on the LCD screen indicates the current status, either On or Off.

4.Press the [Enter] button. The LCD screen indicates whether you are about to turn Autoload mode on or off.

5.Press the [Enter] button to accept the change to Autoload mode or [Cancel] to exit and not save the changes.

44 Autoloader Administration

Chapter 3