Note

Errors will show as “X X YY”. “YY” represents the specific error

 

code, and “X X” represents non pertinent address codes.

 

Additionally, errors range from 0 to -63, where 0 is the newest

 

error and -63 is the oldest.

 

 

Firmware Revision

This option displays the revision of the firmware currently installed in the autoloader.

Note

The tape drive and autoloader firmware is a single image, but

 

displays as three firmware numbers on the front panel. (An

 

example is 5000 8000 0102.)

 

 

To use this option, follow these steps:

1.From the Home Screen or main menu, press the [+] or [-] button until Information appears on the top line of the LCD screen.

2.Press the [Enter] button to access the available options.

3.Press the [+] or [-] button until Firmware Rev appears on the LCD screen.

The LCD screen displays the revision of the firmware currently installed in the autoloader.

4.Press [Cancel] when done.

Note

After a firmware update, the firmware revision displayed on the

 

LCD will not be updated until the autoloader is power cycled.

 

 

50 Autoloader Administration

Chapter 3