HTC NMRHOD00 user manual Connecting to Car Kit Phones

198  Chapter 10  Bluetooth

10.6 Connecting to Car Kit Phones

Bluetooth car kit phones that support the SIM Access Profile (SAP) can connect to your phone and access your SIM card via Bluetooth. Once a SAP connection has been established, you can download phone and SIM contacts from your phone to the car kit phone, and use the car kit phone to answer and make calls.

1.Turn Bluetooth on and set your phone to visible mode. For instructions, see “Turning Bluetooth on and making your phone visible” earlier in this chapter.

2.On the Home screen, slide to the Settings tab, and then tap Menu > Wireless controls > Bluetooth.

. On the Settings tab ( ), tap Advanced.

. Scroll down and tap SIM Access.

. Select the Enable SIM Access Profile (SAP) check box, and then tap Done.

. Connect the car kit phone to your phone via Bluetooth. For instructions, refer to your car kit phone’s manual.

. If this is the first time you are pairing the car kit phone with your phone, enter the car kit phone’s passcode on your phone.

. A pop-up message should appear on your phone saying that a connection has been established between your phone and car kit phone. Tap OK.

Note You are not able to make and receive calls, send and receive messages, or perform related activities on your phone when the SIM Access Profile connection is active. You’ll be able to make or receive calls from the car kit phone during this time. After the connection is disconnected, you will be able to use your phone as before.