8-12 IBM Personal Computer User Guide
Removing the hard disk drive
To replace or remove the hard disk drive, do the following:
1. Make sure to disconnect the power and signal cab les from the CD-R OM driv e
and the diskette drive.
2. Pivot the latch that secures the lower drive mounting tray.
3. Slide the drive mounting tray toward the rear of the computer and remove it.
4. Remove the four screws (two on each side ) that hol d the hard disk driv e to the
mounting tray.
5. Pull the hard disk drive from the mounting tray to remove it.
6. Reverse the procedure to install a new drive.