IBM 2193, 6345, 2194 manual Video Off Method, Activity Monitor

Models: 2193 2194 6345

1 214
Download 214 pages 7.14 Kb
Page 95
Image 95

Video Off Method

This determines the manner in which the monitor is blanked.

 

This selection will cause the system to turn off the

V/H SYNC+Blank

vertical and horizontal synchronization ports and

 

write blanks to the video buffer.

 

 

Blank Screen

This option only writes blanks to the video buffer.

 

 

DPMS Supported

Initial display power management signaling.

 

 

Activity Monitor

MODEM Use IRQ

Use this setting to select the IRQ to be used by the modem.

Choices: 3, 4, 5, 7, 9, 10, 11, NA

HDD Ports Activity

When set to Enabled, any activity taking place at the hard disk or diskette drive will awaken the computer from a powered-down/standby state.

COM Ports Activity

When set to Enabled, any activity taking place at any of the COM ports (serial ports or modem) will awaken the computer from a powered-down/standby state. (For more information about wake up computer, refer to “Automatic Power On” on page 6-19)

LPT Ports Activity

When set to Enabled, any activity taking place at the parallel port will awaken the computer from a powered-down/standby state.

VGA Activity

When set to Enabled, any activity taking place through the video controller will awaken the computer from a powered-down/standby state.

BIOS Setup configuration 6-17

Page 95
Image 95
IBM 2193, 6345, 2194 manual Video Off Method, Activity Monitor