Intel® IXP400 Software

Introduction1

This chapter contains important information to help you learn about and use the Intel® IXP400 Software v2.0 release.

1.1Versions Supported by this Document

This programmer’s guide is intended to be used in conjunction with software release 2.0. Always refer to the accompanying release notes for information about the latest information regarding the proper documentation sources to be used.

Previous versions of the programmer’s guide for earlier IXP400 software releases can be found on the following Web site:

http://developer.intel.com/design/network/products/npfamily/docs/ixp4xx.htm

To identify your version of software:

1.Open the file ixp400_xscale_sw/src/include/IxVersionId.h.

2.Check the value of IX_VERSION_ID.

1.2Hardware Supported by this Release

The Intel® IXP400 Software v2.0 release supports the following processors:

All Intel® IXP42X Product Line of Network Processors and IXC1100 Control Plane Processor

All variants of the Intel® IXP46X Product Line of Network Processors

Warning: Processor capabilities differ between processor product lines or processor variants. Not all capabilities of the processor may be supported by this software release.

1.3Intended Audience

This document describes the software release 2.0 architecture and is intended for software developers and architects employing IXP42X product line processors or Intel® IXP46X product line processors. The document defines each component’s functionality, demonstrates the behavioral links between the components, and presents the common design policies of each component.

Programmer’s Guide

IXP400 Software Version 2.0

April 2005

 

Document Number: 252539, Revision: 007

19

Page 19
Image 19
Intel IXP400 Introduction1, Versions Supported by this Document, Hardware Supported by this Release, Intended Audience