DC Power Supply Recommendations
The power requirements for the Microstepping MForce PowerDrive are:
Output Voltage | +12 to +75 VDC (Includes Back EMF) |
Current (max. per unit) | 4A |
(Actual power supply current requirement will depend upon voltage and load)
Recommended IMS Power Supplies
IMS unregulated linear and unregulated switching power supplies are the best fit for IMS drive products.
IP804 Unregulated Linear Supply
Input Range |
|
120 VAC Versions | |
240 VAC Versions | |
Output (All Measurements were taken at 25˚C, 120 VAC, 60 Hz) |
|
No Load Output Voltage | 76 VDC @ 0 Amps |
Half Load Output | 65 VDC @ 2 Amps |
Full Load output | 58 VDC @ 4 Amps |
IP806 Unregulated Linear Supply
Input Range |
|
120 VAC Versions | |
240 VAC Versions | |
Output (All Measurements were taken at 25˚C, 120 VAC, 60 Hz) |
|
No Load Output Voltage | 76 VDC @ 0 Amps |
Half Load Output | 68 VDC @ 3 Amps |
Full Load Output | 64 VDC @ 6 Amps |
ISP300-7 Unregulated Switching Supply
Input Range |
|
120 VAC Versions | |
240 VAC Versions | |
Output (All Measurements were taken at 25˚C, 120 VAC, 60 Hz) |
|
No Load Output Voltage | 68 VDC @ 0 Amps |
Continuous Output Rating | 63 VDC @ 2 Amps |
Peak Output Rating | 59 VDC @ 4 Amps |
