! 6 5

DV IN/OUT

 

 

 

 

AUDIO

CH 2/4

LINE

VIDEO

Y/C

CH 1/3

 

9

 

 

 

IN

0

 

 

 

OUT

8 7

5[VIDEO Y/C IN] Video Y/C input terminal (4P)

This is the input terminal for YC separate video signals.

●To input video signals from this terminal, set the INPUT SEL. switch on the front panel to “Y/C”.

●When Wide discriminating signals are in- put, ID signals for Wide discriminating sig- nals are recorded.

6[VIDEO LINE IN] Video line input terminal (RCA)

This is the input terminal for composite video signals.

●To input video signals from this terminal, set the INPUT SEL. switch on the front panel to “LINE”.

7[VIDEO Y/C OUT] Video Y/C output terminal (4P)

This is the output terminal for YC separate video signals.

When tapes recorded with Wide discriminating signals are played, ID signals for discriminating signals are output.

8[VIDEO LINE OUT] Video line out- put terminal (RCA)

This is the output terminal for composite video signals.

Memo

●Besides video signals, the following signals from the VIDEO Y/C OUT terminal and VIDEO LINE OUT terminal are displayed on-screen.

•Menu screen signals

•Character display of date, time or operation modes (Status screen)

By pressing the DISPLAY button on the wireless remote controller or by setting the DISPLAY item in the DISPLAY menu, the user can choose to turn the status display on/off.

●The SETUP item of the AUDIO/VIDEO menu can be set to determine whether setup will be added to the signals of VIDEO Y/C OUT terminal and VIDEO LINE OUT terminal. (NTSC only)

REMOTE

DC12V

NTSC/PAL

9PIN

SERIAL NTSC PAL

9[AUDIO IN] Audio input terminal (RCA2)

This is the audio signal (analogue) input termi- nal.

For audio dubbing, sounds from the CH1/3 terminal are recorded on the CH3 channel while those from the CH2/4 channel are recorded on the CH4 channel.

Memo

●When the MIC terminal on the front panel is con- nected to a microphone, sounds from this termi- nal will not be recorded.

0[AUDIO OUT] Audio output terminal (RCA2)

This is the audio signal (analogue) output ter- minal.

Memo

●The audio channel to play back tapes recorded in the 32K mode can be selected with the OUT SE- LECT button on the wireless remote controller or by setting the AUDIO OUT SEL. item of the AU- DIO/VIDEO menu.

●The output level of the playback audio can be se- lected with the OUT LEVEL button of the wireless remote controller or by setting the AUDIO OUT LEVEL item of the AUDIO/VIDEO menu (NORMAL or ATT).

![DV IN/OUT] DV input/output terminal

This is the input/output terminal for digital signals of IEEE1394 standard. It is connected to video devices with DV terminals.

●To input signals from this terminal, please set the INPUT SEL. switch on the front panel to “DV”.

●Signals from this terminal are output regard- less of the INPUT SEL. switch setting.

E-15