This function locates and advances/rewinds to the position where the index signal is recorded. Use the remote controller.
A.DUB | PAUSE | REC |
F.REVF.ADV
PLAY
To locate an index in the forward direction
REW | FF |
STOP
INDEX–INDEX+
REMOTE CONTROL UNIT
INDEX – | INDEX + |
button | button |
Monitor screen
INDEX+1
During index search, this message is displayed on the monitor
(the number represents the position of the index).
•Press the INDEX + button.
The index position to be located can be specified by the number of times this button is pressed. (Max: 99)
To locate an index in the reverse direction
•Press the INDEX - button.
The index position to be located can be specified by the number of times this button is pressed. (Max: 99)
When the INDEX + or INDEX - button is pressed, the unit will
Memo
•If the interval between index signals is less than 1 minute, the function may not work well.
•The specifications for index signal recording varies with the device used.
This function locates the unrecorded parts of the tape. Use the remote controller.
BLANK button
DISPLAY
STILL
BARS MODE BLANK
| AUDIO |
MENU SEARCH+ | MUTING |
| OUT SEL. |
Monitor screen
In the STOP mode, press the BLANK button.
•If the current position is at a recorded part of the tape, the unit
•If the current position of the tape is unrecorded, the unit will first advance the tape in the forward direction for confirmation and thereafter rewind and go into the STILL mode at the last recorded position.
•During a blank search, “BLANK SEARCH” is displayed on the monitor.
BLANK SEARCH