JVC GC-S5 Loading and Removing SmartMedia, Loading the SmartMedia, Open the SmartMedia cover

Loading and Removing SmartMedia

READY GETTING

Always switch off the camera before removing or loading a SmartMedia.

Loading the SmartMedia

The GC-S5 records photographed images onto a SmartMedia card.

1 Open the SmartMedia cover.

• Slide the SmartMedia cover release in the direction of the arrow and then release.

2 Insert the SmartMedia.

• Slide the SmartMedia in slowly so that the contact area faces the gold line on the SmartMedia holder (towards the front of the camera) and push the SmartMedia in fully.

3 Close the SmartMedia cover.

• When you switch on the camera, the

SmartMedia icon “S” appears on the LCD panel on the top of the camera.

•When the viewfinder lamp is flashing red, a warning appears on the LCD monitor. Refer to P.91.

!CAUTIONS

•When you are using a new SmartMedia, always use the camera to format the SmartMedia before use (a P.59).

•See also “SmartMedia” (aP.22).

•If any of the following occur, switch the camera off, clean the contact area on the SmartMedia, and then reload the SmartMedia.

-“@CARD ERROR” appears on the LCD monitor.

-The images recorded on the SmartMedia are not displayed.

-“– – –” appears in the No. of shots available field on the LCD panel.

24