JVC GC-S5 Use the 3 or 4 button to, Press the MENU/EXE, Button, To erase another frame, Step

3	Use the [3] or [4] button to
	select the image to be erased
	and press the [MENU/EXE]
	button.
	• The confirmation screen appears.
	• In step 1, press the [DISP] button to
	select the image to be erased in the
	same way as in 9-shot multi-frame
	playback (aP.29, 53).
4	Press the [MENU/EXE]
	button.

• The image is erased and the menu screen reappears.

ERASE<FRAME> DSC00010

FRAME<> <EXE>

ERASE<FRAME> DSC00010

OK?

OK<EXE> CANCEL<>

!CAUTIONS

•If “@PROTECTED FRAME” is displayed, the image cannot be erased.

- To remove the protection on that image: Switch to Protect mode (aP.76) to remove the protection.

- To erase other images: In Playback mode (aP.42), select the images to be erased

and then go back into Erase mode to erase the frames.

∗ Note that using any buttons other than the Mode dial when “@PROTECTED FRAME” is displayed can cause a malfunction.

To Cancel Single-Frame Erase

In step 4, press the [6] button before you press [MENU/EXE] button.

5	To erase another frame,
	repeat the procedure from

step 2.

57