Sequencer P1

1–5d: Track

[T01...16, MTR, AT1(L), AT2(R), AT3(L), AT4(R),

 

AT1&2, AT3&4, MIXER REC]

 

 

Select the track that you wish to record.

When the HDR-TRIis installed, you will be able to select audio tracks AT1(L), AT2(R), AT3(L), AT4(R), AT1&2 or AT3&4, and MIXER REC in addition to the MIDI tracks T01–16and the MTR (Master Track) that were previously available.

When T01–16are selected, you can record onto the selected MIDI track. Basic settings for recording a MIDI track and settings that determine how the notes will be sounded and output are made in “1–1: Track Play/Rec”–“1–4: Mixer (Track 9–16),” and the recording method is selected in “1–7: Preference.”

When a MIDI track is selected, playing the keyboard and operating the control- lers will cause the internal tone generator to sound with the settings (program and level, etc.) of the MIDI track that you select here (if the Track Status is INT or BOTH). In addition, other MIDI tracks with the same MIDI channel will also sound (if the Track Status is INT or BOTH). Furthermore, messages will be transmitted on the MIDI channels specified for those MIDI tracks (if the Track Status is EXT or BOTH).

If you play the keyboard while an audio track is selected in “1–5: Track,” the set- tings (MIDI channel, Program, Track Status etc.) of the last-selected MIDI track will be used.

When realtime recording a single track, the musical data will be recorded onto the MIDI track you select here.

When realtime recording multiple tracks, you can specify in “1–1i: PLAY/

MUTE/REC” whether recording will occur for each MIDI track.

Select MTR when using “5–1: Track Edit” to edit the master track.

If AT1–AT3&4is selected, you can record onto the selected audio track(s). When AT1&2 or AT3&4 are selected, you can record a stereo pair of audio tracks. The audio track(s) selected here will also appear in the “1–5l: Rec Audio Track Name Display.”

Here you can make basic settings for recording the audio track(s), set the output level and EQ settings, etc. in “1–6: Mix Audio Track 1–4,” and select the record- ing method in “1–7: Preference.”

Select MIXER REC when you wish to record mixer events using “1–6: Mix Audio Track 1–4.”

The audio track name displayed here is set in “5–4: Audio Track Name,” and the

MIDI track name is set in “5–2: Track Name.” However if AT1&2 or AT3&4 are selected, the audio track name will not be displayed.

This parameter is displayed in all pages “1–1: Track Play/Rec” through “1–7: Preference,” and can be modified from any page.

1–5e: Meter/Metronome/Resolution/Multi Rec/Remove Data

Multi Rec

If this is checked, multi-track recording mode will be used, but the audio tracks cannot be recorded.

If this is un-checked, single-track recording mode will be used. Un-check this when you wish to record audio tracks.

22

Page 25
Image 25
Korg HDR-TRI manual 5e Meter/Metronome/Resolution/Multi Rec/Remove Data