Korg HDR-TRI manual Introduction Operation Parameters, 3F Delete Measure

		Sequencer P5
Kind	All Tracks
	Checked	Un-checked
All	MIDI tracks, master track, audio events	Audio events and mixer events of the
	and mixer events of the audio tracks	selected audio track
Audio Event	Audio events of audio tracks 1–4	Audio events of the selected audio track
Mixer Event	All mixer events of audio tracks 1–4	All mixer events of the selected audio
		track
EQ	Equalizer events of audio tracks 1–4	Equalizer events of the selected audio
		track
Send 1/2	Send 1/2 events of audio tracks 1–4	Send 1/2 events of the selected audio
		track
Pan	Panpot events of audio tracks 1–4	Panpot events of the selected audio
		track
Volume	Volume events of audio tracks 1–4	Volume events of the selected audio
		track

4To execute the Erase Measure command, press the OK button. To cancel without executing, press the Cancel button.

Example: If measures 2–3 are erased, measures 2–3 will be blank.
Before Erase
	1	2	3	4	5
After Erase	1	2	3	4	5

No data

Be aware that if this command is executed with “All” selected for Kind and the All Tracks box checked, any control data in MIDI tracks which spans the boundary of the erased and non-erased sections will be erased only in the specified area. Also, erasing measures through which a note is held (i.e., measures falling within the duration of a note) will cause that note data to be erased from subsequent measures as well.

Introduction

Operation

Parameters

5–3F: Delete Measure

This command deletes specified measures of playback data from the track spec- ified in the tab 3 page.

Unlike the Erase Measure command, executing the Delete Measure command will cause the playback data of subsequent measures to move toward the begin- ning of the song to fill the gap.

1In the tab 3 page, specify the audio track from which measures are to be deleted, and the Start Measure and End Measure.

2When you choose Delete Measure, the dia- log box at right will appear.

3If you wish to delete measures from all tracks including the MIDI tracks, check the All Tracks box.

If this box is not checked, measures will be deleted from the audio track specified in the tab 3 page.

4To execute the Delete Measure command, press the OK button. To cancel without executing, press the Cancel button

Appendix

35