Sequencer P5
33
IntroductionOperationParametersAppendix
c: The following table shows the types of events and the possible values for
each type.
5Press the appropriate button to make the desired edits as follows.
When you have finished editing mixer events and wish to return to the tab
page, press the Done button.
A: Insert button
Inserting a mixer event
Select a mixer event located where you wish to insert a new event, and press the
Insert button. A new mixer event will be inserted at the location of the selected
mixer event.
Moving a mixer event
Select the mixer event that you wish to move, and press the Delete button. Then
press the Insert button at the desired new location, and that mixer event will be
inserted.
B: Delete button
Deleting a mixer event
Select the mixer event that you wish to delete, and press the Delete button.
The mixer event will be deleted.
C: Copy button
Copying a mixer event
Select the mixer event that you wish to copy, and press the Copy button. Then
press the Insert button at the desired new location, and that mixer event will be
inserted.
D: Audition Start/Stop button
Starting/stopping audition
When an audio event is highlighted, you can press the Audio Start/Stop button
to playback that audio event. During playback, you can press the button once
again to stop playback.
Sound name (ex. Take01L)
(display only) (Audio event)
E:001.00.000...999.15.191 (display
only) (end of audio event: measure,
beat, clock)
HiEQ G: 15+15
(gain)
LoEQ G: 15+15
(gain)
Send1 V: 0127
(value)
Send2 V: 0127
(value)
Pan V: 0127
(value)
Volume V: 0127
(value)