Settings for recording

Song settings

1Access the Sequencer mode P1 tab 5 page (ATrkRec).

2 3 7

4

5

6

1

2In the Song field, select a new song and assign a song name.

The display will ask “Are You Sure?” Press the OK button.

3In the Track field, select the audio track(s) that you wish to record.

Select AT1–AT4for monaural recording, or AT1&2 or AT3&4 for stereo record- ing. Make sure that the audio track(s) selected here appear in the Audio Track Display.

4If you wish to hear the metronome while you record, set the Metronome setting to On or Rec (to sound only during recording), and adjust the tab 7 page (Preference) Metronome settings Precount, Output, and Level.

With a metronome Output setting of L, L+R, or R, the metronome sound will be output from the headphone jack and from output jacks 1/L/MONO and 2/R. With a metronome Output setting of Send 1, Send 1+2, or Send 2, the metro- nome sound will be output from output jacks 3 and 4.

5In the Take field, specify the take name.

6If you want to differentiate sounds by a number added to the end of the take name, check the Take No. box.

7If two or more hard disks are connected, execute the Page Menu Command “Rec HD Select” and select the hard disk that will be used for recording.

If only one hard disk is connected there is no need to execute this command.

Introduction

Operation

Parameters

Appendix

7

Page 10
Image 10
Korg HDR-TRI manual Song settings, Track field, select the audio tracks that you wish to record