Editing
15
IntroductionOperationParametersAppendix
portion of track has not been lost.)
9When you are nished, press the [START/STOP] key.
Editing

Creating repetitions of the same phrase

1Record using the procedure Recording an audio track.
2Access the Sequencer mode P5 tab 3 page (Atrk Edit).
3In the Track setting, select the audio track that you wish to edit.
4In the Start Measure eld, specify the copy destination.
5Press the page menu command Copy Measure.
6In the dialog box, make settings for Song, A.Track, and Measure Start/End to
specify the phrase that you wish to re-use, and then press the OK button.
The phrase of the area you specified here will be copied to the measure of the
track that you specified in step 4.
7Repeat steps 46.
8Press the [RESET] key to return the current location to the beginning of the song,
and then press the [START/STOP] key to listen to the playback.

Track bouncing (ping-pong recording)

Here’s how to bounce (i.e., combine or “ping-pong”) audio tracks 1, 2 and 3 to
audio track 4. Because the TRINITY can bounce tracks in the digital domain,
you can perform this operation any number of times without degrading signal
quality.
1In the Sequencer mode, set Track to AT4(R).
2In the Sequencer mode P1 tab 6 page (MixA14), set audio track 4 to a Volume of
0.
To be sure that audio track 4’s volume stays at 0, set its Mix Audio Track Mode
to Manual.
3In the Sequencer mode P1 tab 1 and 2 pages (Trk18, Trk916), set each MIDI
tracks Track PLAY/MUTE/REC setting to MUTE.
2
5
3
4