Korg HDR-TRI manual 5m Monitor Mode Select, Menu Command, 5D Rec HD Select

Sequencer P1

1–5m: Monitor Mode Select

This selects Auto Input ON/OFF.

Audio tracks that are selected in “1-5d: Track” will be monitored differently than audio tracks that are not selected. (Refer to the table below.)

If this is checked, Auto Input will be ON. During auto/manual punch in record- ing, monitoring will be switched automatically for the audio tracks selected in the Track page: the external input will be monitored during the measures being recorded, and the track playback will be monitored before and after these mea- sures.

For audio tracks which are not selected in the Track page, the track playback will always be monitored.

If this is not checked, Auto Input will be OFF. Audio tracks selected in the Track page will always monitor the external input.

For audio tracks which are not selected in the Track page, the track playback will always be monitored.

Audio track monitoring (Line: external input, Track: track playback)

				During		During Punch Rec
	Auto Input	Stopped	Playing	Overwrite
					...In		In...Out	Out...
				Rec
Audio	ON	Line	Track	Line	Track		Line	Track*
track(s)
selected	OFF	Line	Line	Line	Line		Line	Line
by Track
Audio	ON	Track	Track	Track	Track		Track	Track
tracks not
selected	OFF	Track	Track	Track	Track		Track	Track
by Track

*When auto punch in recording is performed with Auto Input ON, approxi- mately 0.5 seconds will be required from when the Punch Out point is reached until the track playback sound can once again be monitored. (It is not the case that the track audio in this portion has been lost.)

Page Menu Command

1–5D: Rec HD Select

Select the hard disk on which recording will take place.

The amount of time available for recording (Free Time) will also be displayed here. Since the amount of recorded sound will gradually increase, we recom- mend that you periodically use the Disk mode command “1–4F: Delete Unused Sound” to organize the sound and maintain the Free Time space.

1When you select Rec HD Select, the dialog box at right will appear.

2Select the hard disk for recording: ID0–ID6. Keep in mind the amount of Free Time as you select a hard disk.

3To execute Rec HD Select, press the OK but- ton. To cancel without executing, press the Cancel button.

Introduction

Operation

Parameters

Appendix

25