Korg HDR-TRI Playback

Playback

Playback

Playing back the track(s) you recorded

1Press the [RESET] key to return to the beginning of the song.

2Press the [START/STOP] key.

The audio that was recorded will be played back.

Adjusting the pan or volume balance of the tracks

You can adjust the pan and volume of each track so that the recorded tracks are

played back in an appropriate balance. You can also use the equalizer to adjust

the tone of each track.

1Access the Sequencer mode P1 tab 6 page (MixA1–4).

2Set the Mix Audio Track Mode to MANUAL for the audio tracks that have already

been recorded.

3Press the [RESET] key to return to the beginning of the song, and press the [START/

STOP] key.

Playback will begin.

4Use the Pan/Volume settings to adjust the pan and volume of each track, and use

EQ to adjust the tone.

5When you are ﬁnished, press the [START/STOP] key.

Contents

Main Table of Contents 3. Parameters 2. Operation 1. Introduction 4. Appendix 1. Introduction About hard disk recording Features of the HDR-TRI About hard disks About sound and audio events 2. Operation Hard disk connections and settings Settings for recording Formatting a hard disk Types of SCSI devices that can be connected and their ID settings Connections for recording Song settings 8 16 4 Checking the external input Page Recording Recording an audio track Recording a guitar in stereo on tracks 3 and 4 while listening to audio tracks 1 and 2 Checking the external input The Compare function Playback Playing back the track(s) you recorded Adjusting the pan or volume balance of the tracks Recording mixer events Re-recording Using the rehearsal function Using auto punch-in recording to edit Editing Creating repetitions of the same phrase Track bouncing (ping-pong recording) Bouncing MIDI tracks and audio tracks together Applying master effects Creating a song in conjunction with the MIDI sequencer Recording the vocal Checking the external input Recording Adjusting the balance and equalizer for the monitor output Using effect processing Recording mixer events Saving/loading recorded data Saving song data to a hard disk Loading data from a hard disk 20 2 Using a recorded sound more than once in the same .SNG le Creating different arrangements using the same vocal Using the same sound more than once 21 3. Parameters Tempo Mode 15c: Tempo/Tempo Mode 15: Audio Track Rec Multi Rec 15d: Track [T01...16, MTR, AT1(L), AT2(R), AT3(L), AT4(R), AT1&2, AT3&4, MIXER REC] 15e: Meter/Metronome/Resolution/Multi Rec/Remove Data 15f: Take 15h: Rehearsal 15g: Take Number 15i: Input Select [Analog, Digital] 15j: Input Level [+4 dBu, 10 dBu, 30 dBu] ...+18 dB] 15k: Rec Level [ 15l: Audio Track Name Display 25 15D: Rec HD Select 15m: Monitor Mode Select 26 L (Low EQ) [15...0...+15] 16g: Send1/Send2 [0...127] H (High EQ) [15...0...+15] 16: Mix Audio Track 14 16i: Volume [0...100...127] 16j: Mix Audio Track Mode [MANUAL/READ/MUTE/SOLO/WRITE] Page 17: Preference 17h: Recording Setup 25D: Rec HD Select Sequencer P2 25c: Delay [0...255 samples/0...5 ms] 25: Audio Track parameter (Audio Track 14) Sequencer P5 AT1&2, AT3&4, MIXER REC] 53d: Track [T01...16, MTR, AT1(L), AT2(R), AT3(L), AT4(R), 53: Audio Track Edit 32 53B: Automation Edit 4 1 2 33 5 A: Insert button B: Delete button C: Copy button Page 35 4 53F: Delete Measure 1 2 36 53G: Insert Measure 1 2 3 37 53H: Copy Measure 4 5 6 1 2 38 53I: Move Measure 1 2 3 4 39 53J: Audio Event Edit 1 2 3 Page Page Page Page 44 54: Audio Track Name 54j: Audio Track Name 54B: Automation Edit 54C: Erase Audio Track 54D: Copy Audio Track 45 54F: Delete Measure 54G: Insert Measure 54H: Copy Measure 54I: Move Measure Disk P1 11: Load 13: Utility 48 13G: Format 13H: Wipe 1 2 3 Page 50 14: Audio Utility 14B: Backup to DAT 1 2 3 Page Page Page Page Page 56 Messages Troubleshooting Specications