LevelOne GSW-2692 manual Displaying Lacp Port Counters, Field Description

Port Configuration 3

CLI – The following example configures LACP parameters for ports 1-4. Ports 1-4 are used as active members of the LAG.

Console(config)#interface ethernet 1/1				4-108
Console(config-if)#lacp		actor system-priority 3		4-126
Console(config-if)#lacp		actor admin-key 120		4-127
Console(config-if)#lacp		actor port-priority 128		4-129
Console(config-if)#exit
.
.
.
Console(config)#interface ethernet 1/4
Console(config-if)#lacp		actor system-priority 3
Console(config-if)#lacp		actor admin-key 120
Console(config-if)#lacp		actor port-priority 512
Console(config-if)#end
Console#show lacp sysid				4-129
Port Channel	System	Priority	System MAC Address

-------------------------------------------------------------------------

1	3	00-90-CC-31-31-31
2	32768	00-90-CC-31-31-31
3	32768	00-90-CC-31-31-31
4	32768	00-90-CC-31-31-31

Console#show lacp 1 internal 4-129

Port channel : 1

-------------------------------------------------------------------------

Oper Key : 120

Admin Key : 0 Eth 1/1

-------------------------------------------------------------------------

LACPDUs Internal:		30 sec
LACP System Priority:		3
LACP	Port Priority:	128
Admin Key:		120
Oper	Key:	120

Admin State : defaulted, aggregation, long timeout, LACP-activity

Oper State:	distributing, collecting, synchronization,
	aggregation, long timeout, LACP-activity
.
.
.

Displaying LACP Port Counters

You can display statistics for LACP protocol messages.

	Table 3-6 LACP Port Counters
Field	Description
LACPDUs Sent	Number of valid LACPDUs transmitted from this channel group.
LACPDUs Received	Number of valid LACPDUs received on this channel group.
Marker Sent	Number of valid Marker PDUs transmitted from this channel group.
Marker Received	Number of valid Marker PDUs received by this channel group.

3-75