Setting the Switch’s IP Address

3 Configuring the Switch

CLI – Enter the following command.

Console#show bridge-ext	4-165
Max support VLAN numbers:	255
Max support VLAN ID:	4094
Extended multicast filtering services:	No
Static entry individual port:	Yes
VLAN learning:	IVL
Configurable PVID tagging:	Yes
Local VLAN capable:	No
Traffic classes:	Enabled
Global GVRP status:	Disabled
GMRP:	Disabled
Console#

This section describes how to configure an IP interface for management access over the network. The IP address for this switch is obtained via DHCP by default. To manually configure an address, you need to change the switch’s default settings (IP address 0.0.0.0 and netmask 255.0.0.0) to values that are compatible with your network. You may also need to a establish a default gateway between the switch and management stations that exist on another network segment.

You can manually configure a specific IP address, or direct the device to obtain an address from a BOOTP or DHCP server. Valid IP addresses consist of four decimal numbers, 0 to 255, separated by periods. Anything outside this format will not be accepted by the CLI program.

Command Attributes

•Management VLAN – ID of the configured VLAN (1-4094, no leading zeroes). By default, all ports on the switch are members of VLAN 1. However, the management station can be attached to a port belonging to any VLAN, as long as that VLAN has been assigned an IP address.

•IP Address Mode – Specifies whether IP functionality is enabled via manual configuration (Static), Dynamic Host Configuration Protocol (DHCP), or Boot Protocol (BOOTP). If DHCP/BOOTP is enabled, IP will not function until a reply has been received from the server. Requests will be broadcast periodically by the switch for an IP address. (DHCP/BOOTP values can include the IP address, subnet mask, and default gateway.)

•IP Address – Address of the VLAN interface that is allowed management access. Valid IP addresses consist of four numbers, 0 to 255, separated by periods. (Default: 0.0.0.0)

•Subnet Mask – This mask identifies the host address bits used for routing to specific subnets. (Default: 255.0.0.0)

•Gateway IP address – IP address of the gateway router between this device and management stations that exist on other network segments. (Default: 0.0.0.0)

•MAC Address – The physical layer address for this switch.

•Restart DHCP – Requests a new IP address from the DHCP server.

3-12

GSW-2692 specifications

The LevelOne GSW-2692 is an advanced Layer 2 Gigabit Ethernet switch that is designed to cater to the networking needs of both small and medium-sized enterprises. Highly regarded for its reliability and performance, the GSW-2692 offers 24 Gigabit Ethernet ports, enabling seamless and high-speed data transfers across connected devices. With its robust design and versatile capabilities, this switch has earned its place as an essential component in modern IT infrastructure.

One of the standout features of the GSW-2692 is its extensive support for advanced networking technologies. The switch includes support for IEEE 802.1Q VLAN tagging, which allows users to create separate virtual networks for improved traffic management and enhanced security. By segregating network traffic, businesses can optimize bandwidth usage and reduce congestion, contributing to overall increased network performance.

Additionally, the GSW-2692 supports Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP), ensuring loop-free network topology. This capability is crucial in larger networking environments where multiple switches are interconnected, as it prevents broadcast storms and enhances network resilience. The switch also includes features such as port mirroring, which provides administrators with the capability to monitor network traffic in real-time for troubleshooting and analysis.

Power over Ethernet (PoE) support is another significant advantage of the GSW-2692. With PoE functionality, it enables the switch to deliver electrical power along with data to connected devices such as IP cameras, VoIP phones, and wireless access points, eliminating the need for additional power sources and simplifying installations.

In terms of physical characteristics, the LevelOne GSW-2692 is designed for efficient heat dissipation and features a fanless design, which ensures silent operation. Its desktop or rack-mountable options make it flexible for various installation environments. The switch also features a web-based management interface, which simplifies the configuration and monitoring processes, allowing for intuitive management of network settings.

Overall, the LevelOne GSW-2692 stands out as a feature-rich, reliable, and high-performance networking solution that meets the demands of modern enterprises. Its combination of advanced technologies, scalability, and ease of use makes it an excellent choice for businesses looking to enhance their network infrastructure.

LevelOne GSW-2692 manual Setting the Switch’s IP Address, CLI Enter the following command

Models: GSW-2692

CLI – Enter the following command.

4-165

IVL