LevelOne GSW-2692 manual Traffic Classes

3 Configuring the Switch

Web – Click Priority, Traffic Classes. The current mapping of CoS values to output queues is displayed. Assign priorities to the traffic classes (i.e., output queues), then click Apply.

Figure 3-73 Traffic Classes

CLI – The following example shows how to change the CoS assignments to a one-to-one mapping.

Console(config)#interface ethernet					1/1	4-108
Console(config-if)#queue				cos-map 0	0	4-171
Console(config-if)#queue				cos-map 1	1
Console(config-if)#queue				cos-map 2	2
Console(config-if)#end
Console#show queue		cos-map ethernet 1/1				4-173
Information of Eth		1/1
CoS Value	: 0	1 2	3	4 5 6 7
Priority Queue: 0		1 2	1	2 2 3 3
Console#

*Mapping specific values for CoS priorities is implemented as an interface configuration command, but any changes will apply to the all interfaces on the switch.

3-126