Selecting the Queue Mode

Class of Service Configuration 3

You can set the switch to service the queues based on a strict rule that requires all traffic in a higher priority queue to be processed before lower priority queues are serviced, or use Weighted Round-Robin (WRR) queuing that specifies a relative weight of each queue. WRR uses a predefined relative weight for each queue that determines the percentage of service time the switch services each queue before moving on to the next queue. This prevents the head-of-line blocking that can occur with strict priority queuing.

Command Attributes

•WRR - Weighted Round-Robin shares bandwidth at the egress ports by using scheduling weights 1, 2, 4, 6 for queues 0 through 3 respectively. (This is the default selection.)

•Strict - Services the egress queues in sequential order, transmitting all traffic in the higher priority queues before servicing lower priority queues.

Web – Click Priority, Queue Mode. Select Strict or WRR, then click Apply.

Figure 3-74 Queue Mode

CLI – The following sets the queue mode to strict priority service mode.

Console(config)#queue mode wrr	4-169
Console(config)#exit
Console#show queue mode	4-172
Queue mode: wrr
Console#

Setting the Service Weight for Traffic Classes

This switch uses the Weighted Round Robin (WRR) algorithm to determine the frequency at which it services each priority queue. As described in “Mapping CoS Values to Egress Queues” on page 3-125, the traffic classes are mapped to one of the four egress queues provided for each port. You can assign a weight to each of these queues (and thereby to the corresponding traffic priorities). This weight sets the frequency at which each queue will be polled for service, and subsequently affects the response time for software applications assigned a specific priority value.

Command Attributes

•WRR Setting Table14 – Displays a list of weights for each traffic class (i.e., queue).

•Weight Value – Set a new weight for the selected traffic class. However, note that Queue 0 is fixed at a weight of 1, and cannot be configured. (Range: 1-31)

14. CLI shows Queue ID.

3-127

GSW-2692 specifications

The LevelOne GSW-2692 is an advanced Layer 2 Gigabit Ethernet switch that is designed to cater to the networking needs of both small and medium-sized enterprises. Highly regarded for its reliability and performance, the GSW-2692 offers 24 Gigabit Ethernet ports, enabling seamless and high-speed data transfers across connected devices. With its robust design and versatile capabilities, this switch has earned its place as an essential component in modern IT infrastructure.

One of the standout features of the GSW-2692 is its extensive support for advanced networking technologies. The switch includes support for IEEE 802.1Q VLAN tagging, which allows users to create separate virtual networks for improved traffic management and enhanced security. By segregating network traffic, businesses can optimize bandwidth usage and reduce congestion, contributing to overall increased network performance.

Additionally, the GSW-2692 supports Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP), ensuring loop-free network topology. This capability is crucial in larger networking environments where multiple switches are interconnected, as it prevents broadcast storms and enhances network resilience. The switch also includes features such as port mirroring, which provides administrators with the capability to monitor network traffic in real-time for troubleshooting and analysis.

Power over Ethernet (PoE) support is another significant advantage of the GSW-2692. With PoE functionality, it enables the switch to deliver electrical power along with data to connected devices such as IP cameras, VoIP phones, and wireless access points, eliminating the need for additional power sources and simplifying installations.

In terms of physical characteristics, the LevelOne GSW-2692 is designed for efficient heat dissipation and features a fanless design, which ensures silent operation. Its desktop or rack-mountable options make it flexible for various installation environments. The switch also features a web-based management interface, which simplifies the configuration and monitoring processes, allowing for intuitive management of network settings.

Overall, the LevelOne GSW-2692 stands out as a feature-rich, reliable, and high-performance networking solution that meets the demands of modern enterprises. Its combination of advanced technologies, scalability, and ease of use makes it an excellent choice for businesses looking to enhance their network infrastructure.

LevelOne GSW-2692 manual Selecting the Queue Mode, Setting the Service Weight for Traffic Classes

Models: GSW-2692