LevelOne GSW-2692 manual Shutdown, Syntax No shutdown Default Setting

Interface Commands 4

Example

The following example enables flow control on port 5.

Console(config)#interface ethernet 1/5

Console(config-if)#flowcontrol

Console(config-if)#no negotiation

Console(config-if)#

Related Commands

negotiation (4-110)

capabilities (flowcontrol, symmetric) (4-111)

shutdown

This command disables an interface. To restart a disabled interface, use the no form.

Syntax

[no] shutdown

Default Setting

All interfaces are enabled.

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

This command allows you to disable a port due to abnormal behavior (e.g., excessive collisions), and then reenable it after the problem has been resolved. You may also want to disable a port for security reasons.

Example

The following example disables port 5.

Console(config)#interface ethernet 1/5

Console(config-if)#shutdown

Console(config-if)#

4-113