LevelOne GSW-2692 manual Configuration Modes Command Prompt, Consoleconfig-if# 108

Entering Commands 4

To enter the Global Configuration mode, enter the command configure in Privileged Exec mode. The system prompt will change to “Console(config)#” which gives you access privilege to all Global Configuration commands.

Console#configure

Console(config)#

To enter the other modes, at the configuration prompt type one of the following commands. Use the exit or end command to return to the Privileged Exec mode.

Table 4-2 Configuration Modes

Mode	Command	Prompt	Page
Line	line {console vty}	Console(config-line)#	4-10
Access	access-list ip standard	Console(config-std-acl)#	4-89
Control List	access-list ip extended	Console(config-ext-acl)#
	access-list mac	Console(config-mac-acl)#
Interface	interface {ethernet port port-channel id vlan id}	Console(config-if)#	4-108
VLAN	vlan database	Console(config-vlan)#	4-149

For example, you can use the following commands to enter interface configuration mode, and then return to Privileged Exec mode

Console(config)#interface ethernet 1/5

.

.

.

Console(config-if)#exit

Console(config)#

4-7