Manuals / LevelOne / Computer Equipment / Switch

LevelOne GSW-2692 manual Switchport ingress-filtering

Models: GSW-2692

1 390

Download 390 pages 4.67 Kb

Page 331

Image 331

VLAN Commands 4

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

When set to receive all frame types, any received frames that are untagged are assigned to the default VLAN.

Example

The following example shows how to restrict the traffic received on port 1 to tagged frames:

Console(config)#interface ethernet 1/1 Console(config-if)#switchport acceptable-frame-types tagged Console(config-if)#

Related Commands

switchport mode (4-152)

switchport ingress-filtering

This command enables ingress filtering for an interface. Use the no form to restore the default.

Syntax

[no] switchport ingress-filtering

Default Setting

Disabled

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

•Ingress filtering only affects tagged frames.

•If ingress filtering is disabled and a port receives frames tagged for VLANs for which it is not a member, these frames will be flooded to all other ports (except for those VLANs explicitly forbidden on this port).

•If ingress filtering is enabled and a port receives frames tagged for VLANs for which it is not a member, these frames will be discarded.

•Ingress filtering does not affect VLAN independent BPDU frames, such as GVRP or STA. However, they do affect VLAN dependent BPDU frames, such as GMRP.

4-153

Page 331

Image 331

LevelOne GSW-2692 manual Switchport ingress-filtering, Syntax No switchport ingress-filtering Default Setting

GSW-2692 specifications

The LevelOne GSW-2692 is an advanced Layer 2 Gigabit Ethernet switch that is designed to cater to the networking needs of both small and medium-sized enterprises. Highly regarded for its reliability and performance, the GSW-2692 offers 24 Gigabit Ethernet ports, enabling seamless and high-speed data transfers across connected devices. With its robust design and versatile capabilities, this switch has earned its place as an essential component in modern IT infrastructure.

One of the standout features of the GSW-2692 is its extensive support for advanced networking technologies. The switch includes support for IEEE 802.1Q VLAN tagging, which allows users to create separate virtual networks for improved traffic management and enhanced security. By segregating network traffic, businesses can optimize bandwidth usage and reduce congestion, contributing to overall increased network performance.

Additionally, the GSW-2692 supports Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP), ensuring loop-free network topology. This capability is crucial in larger networking environments where multiple switches are interconnected, as it prevents broadcast storms and enhances network resilience. The switch also includes features such as port mirroring, which provides administrators with the capability to monitor network traffic in real-time for troubleshooting and analysis.

Power over Ethernet (PoE) support is another significant advantage of the GSW-2692. With PoE functionality, it enables the switch to deliver electrical power along with data to connected devices such as IP cameras, VoIP phones, and wireless access points, eliminating the need for additional power sources and simplifying installations.

In terms of physical characteristics, the LevelOne GSW-2692 is designed for efficient heat dissipation and features a fanless design, which ensures silent operation. Its desktop or rack-mountable options make it flexible for various installation environments. The switch also features a web-based management interface, which simplifies the configuration and monitoring processes, allowing for intuitive management of network settings.

Overall, the LevelOne GSW-2692 stands out as a feature-rich, reliable, and high-performance networking solution that meets the demands of modern enterprises. Its combination of advanced technologies, scalability, and ease of use makes it an excellent choice for businesses looking to enhance their network infrastructure.

Contents

LevelOne Page Contents Page Iii Command Line Interface Contents Page Vii Viii Contents Page Appendix a Software Specifications Xii Xiii Tables Xiv Figures Xvi Figures Lacp Configuration Key Features Key FeaturesFeature Description Description of Software Features Description of Software Features Introduction Password super System DefaultsSystem Defaults Function Parameter Default Client Enabled System Defaults Function Parameter Clock Synchronization Disabled Introduction Configuration Options Connecting to the Switch Required Connections Initial Configuration Remote Connections Stack Operations Console Connection Basic Configuration Setting an IP Address Setting PasswordsManual Configuration Dynamic Configuration Community Strings Enabling Snmp Management Access Trap Receivers Saving Configuration Settings Enter the name of the start-up file. Press Enter Managing System Files Initial Configuration Using the Web Interface Configuring the Switch Home Navigating the Web Browser Interface Revert Apply Help Configuration Options ActionPanel Display Button System System Information ConfigurationMain Menu Main Menu Description ACL 114 105Current Table 109 129 Class-of-service value IP Dscp PriorityMatching an ACL rule Igmp Snooping 135 Igmp Configuration 120 Field Attributes Displaying System Information CLI Specify the hostname, location and contact information Displaying Switch Hardware/Software VersionsExpansion Slot 1/2 Combination RJ-45/SFP ports Switch Information Displaying Bridge Extension Capabilities Bridge Extension Configuration CLI Enter the following command Setting the Switch’s IP AddressCommand Attributes Manual IP Configuration Dhcp IP Configuration Using DHCP/BOOTP Managing Firmware Copy Firmware Downloading System Software from a Server 10 Deleting Files Saving or Restoring Configuration Settings 11 Downloading Configuration Settings for Startup Downloading Configuration Settings from a Server Console Port Settings 13 Console Port Settings Telnet Settings 14 Enabling Telnet System Log Configuration Configuring Event Logging Level Severity Name Description Logging Levels 16 Remote Logs Remote Log Configuration CLI This example shows the event message stored in RAM Displaying Log Messages Sending Simple Mail Transfer Protocol Alerts 18 Enabling and Configuring Smtp Alerts 19 Resetting the System Resetting the System Configuring Sntp Setting the System Clock 21 Setting the System Clock Setting the Time Zone Access Mode Setting Community Access StringsSimple Network Management Protocol Specifying Trap Managers and Trap Types 22 Configuring Snmp Configuring User Accounts User Authentication 24 Access Levels Command Usage Configuring Local/Remote Logon Authentication Tacacs Settings Radius Settings 25 Authentication Settings Https System Support Web Browser Operating System Configuring Https 26 Https Settings Replacing the Default Secure-site Certificate Configuring the Secure Shell User Authentication Generating the Host Key Pair 27 SSH Host-Key Settings SSH server includes basic settings for authentication Configuring the SSH Server Configuring Port Security 29 Configuring Port Security Configuring 802.1X Port Authentication Web Click Security, 802.1X, Information Displaying 802.1X Global Settings802.1X protocol provides client authentication CLI This example shows the default global setting for Configuring Port Settings for Configuring 802.1X Global SettingsCLI This example enables 802.1X globally for the switch Authorized 32 802.1X Port Configuration Consoleconfig#interface ethernet 1/2 802.1X Statistics Displaying 802.1X StatisticsParameter Description CLI This example displays the 802.1X statistics for port Filtering IP Addresses for Management Access 34 IP Filter Configuring Access Control Lists Access Control ListsCLI This example allows Snmp access for a specific client CLI This example creates a standard IP ACL named david Setting the ACL Name and Type 36 ACL Configuration Standard IP Configuring a Standard IP ACL Configuring an Extended IP ACL 37 ACL Configuration Extended IP 38 ACL Configuration MAC Configuring a MAC ACL 39 Binding a Port to an ACL Binding a Port to an Access Control List Displaying Connection Status Port ConfigurationField Attributes Web 40 Displaying Port/Trunk Information Field Attributes CLI Web Click Port, Port Information or Trunk Information Current Status Configuring Interface Connections 41 Port/Trunk Configuration Creating Trunk Groups 42 Configuring Port Trunks Statically Configuring a Trunk 124 Enabling Lacp on Selected Ports 43 Lacp Configuration 125 Dynamically Creating a Port Channel Configuring Lacp Parameters 44 Lacp Port Configuration Field Description Displaying Lacp Port CountersYou can display statistics for Lacp protocol messages Lacp Port Counters LACPDUs Illegal Pkts Protocols Ethernet TypeCLI The following example displays Lacp counters Lacp Internal Configuration Information Displaying Lacp Settings and Status for the Local Side 46 Lacp Port Internal Information Lacp Neighbor Configuration Information Field Description Displaying Lacp Settings and Status for the Remote Side Console#show Lacp 1 neighbors 48 Port Broadcast Control Setting Broadcast Storm Thresholds 114 Configuring Port Mirroring 49 Mirror Port Configuration Configuring Rate Limits Rate Limit Granularity Rate Limit Configuration Showing Port Statistics 51 Output Rate Limit Port Configuration Port Statistics Port Statistics Fragments Or alignment error 52 Port Statistics Setting Static Addresses Address Table SettingsCLI This example shows statistics for port Displaying the Address Table 53 Configuring a Static Address Table 54 Configuring a Dynamic Address Table Changing the Aging Time Spanning Tree Algorithm ConfigurationCLI This example sets the aging time to 300 seconds Displaying Global Settings Spanning Tree Algorithm Configuration 56 Displaying Spanning Tree Information Web Click Spanning Tree, STA, Information Global settings apply to the entire switch Configuring Global Settings Configuration Settings for Rstp 57 Configuring Spanning Tree Displaying Interface Settings AD B CLI This example shows the STA attributes for port 58 Displaying Spanning Tree Information Configuring Interface Settings CLI This example sets STA attributes for port 59 Configuring Spanning Tree per Port Ieee 802.1Q VLANs Vlan Configuration VA Vlan Aware VU Vlan Unaware Forwarding Tagged/Untagged Frames Web Click VLAN, 802.1Q VLAN, Basic Information Enabling or Disabling Gvrp Global SettingCLI This example enables Gvrp for the switch Displaying Basic Vlan Information Displaying Current VLANs Command Attributes Web 62 Displaying Current VLANs Command Attributes CLI Creating VLANs 63 Configuring a Vlan Static List CLI This example creates a new Vlan Adding Static Members to VLANs Vlan Index 64 Configuring a Vlan Static Table 65 Vlan Static Membership by Port Adding Static Members to VLANs Port Index Configuring Vlan Behavior for Interfaces 66 Configuring VLANs per Port Private VLANs 67 Private Vlan Information Displaying Current Private VLANs Associating VLANs Configuring Private VLANsEach community Vlan must be associated with a primary Vlan 69 Private Vlan Association Displaying Private Vlan Interface Information 70 Private Vlan Port Information Configuring Private Vlan Interfaces 71 Private Vlan Port Configuration Layer 2 Queue Settings Class of Service ConfigurationSetting the Default Priority for Interfaces CLI This example assigns a default priority of 5 to port Port Priority Configuration Priority Level Traffic Type Mapping CoS Values to Egress Queues10 Mapping CoS Values to Egress Queues 11 CoS Priority Levels 73 Traffic Classes Setting the Service Weight for Traffic Classes Selecting the Queue Mode Mapping Layer 3/4 Priorities to CoS Values Layer 3/4 Priority Settings Mapping IP Precedence Selecting IP Precedence/DSCP Priority12 Mapping IP Precedence Priority Level Traffic Type 77 IP Precedence Priority 13 Mapping Dscp Priority Values IP Dscp Value CoS Value Mapping Dscp Priority10, 12, 14 18, 20, 22 26, 28, 30, 32, 34 38, 40 79 IP Port Priority Status Mapping IP Port Priority 14 Egress Queue Priority Mapping Mapping CoS Values to ACLs 81 ACL CoS Priority Layer 2 Igmp Snooping and Query Multicast Filtering Configuring Igmp Snooping and Query Parameters Displaying Interfaces Attached to a Multicast Router 82 Igmp Configuration 83 Multicast Router Port Information Specifying Static Interfaces for a Multicast Router 84 Static Multicast Router Port Configuration 85 IP Multicast Registration Table Displaying Port Members of Multicast Services 86 Igmp Member Port Table Assigning Ports to Multicast Services Vlan Accessing the CLI Using the Command Line InterfaceTelnet Connection Command Line Interface Keywords and Arguments Entering CommandsCommand Completion Getting Help on Commands Showing Commands Command Modes Negating the Effect of CommandsUsing Command History Understanding Command Modes Configuration Commands Exec Commands Consoleconfig-if# 108 Configuration Modes Command Prompt Command Line Processing Command Line ProcessingKeystroke Function Command Groups Description Command Groups Line Line Commands Example LoginRelated Commands Syntax Login local no login No password is specified PasswordUsername 4-26 password Syntax Password 0 7 password no password Exec-timeout Timeout login responseSyntax Exec-timeout seconds no exec-timeout Default value is three attempts Password-threshSilent-time Timeout login response Syntax Password-thresh threshold no password-thresh Syntax Databits 7 8 no databits Silent-timeDatabits Syntax Silent-time seconds no silent-time Syntax Parity none even odd no parity Parity Syntax Stopbits 1 SpeedStopbits Syntax Speed bps no speed Syntax Show line console vty DisconnectShow line Syntax Disconnect session-id General Commands Function Mode General CommandsEnable To show all lines, enter this command Level DisableDisable Enable password Enable Show history Configure End Reload Quit This command exits the configuration programThis example shows how to quit a CLI session Exit Device Designation Commands System Management CommandsPrompt Syntax Hostname name no hostname User Access CommandsUser Access Commands Function Mode Hostname Guest Admin 10 Default Login Settings Username Access-level PasswordUsername Default is level Default password is super Enable passwordEnable 4-19 authentication enable Management IP Filter Commands11 IP Filter Commands Function Mode Management Show management Ip http port Web Server CommandsIp http server 13 Https System Support Web Browser Operating System Syntax No ip http secure-server Default SettingIp http secure-server Ip http port Ip http secure-server Ip http secure-portIp http secure-port Copy tftp https-certificate Portnumber The UDP port used for HTTPS/SSL. Range Ip telnet port Telnet Server CommandsIp telnet server Sets the SSH server key size Copy tftp public-key Secure Shell Commands15 SSH Commands Function Mode Ip telnet port System Management Commands Ip ssh server Syntax No ip ssh server Default SettingIp ssh crypto host-key generate 4-39 show ssh Exec-timeout 4-13 show ip ssh Ip ssh timeoutIp ssh authentication-retries Syntax Ip ssh timeout seconds no ip ssh timeout Delete public-key Ip ssh server-key sizeSyntax Delete public-key username dsa rsa Syntax Ip ssh crypto zeroize dsa rsa Ip ssh crypto host-key generateIp ssh crypto zeroize Syntax Ip ssh crypto host-key generate dsa rsa Show ip ssh Ip ssh save host-keySyntax Ip ssh save host-key dsa rsa 16 show ssh display description Show ssh Shows all public keys Show public-keySyntax Show public-key user username host Username Name of an SSH user. Range 1-8 characters Logging on Event Logging Commands17 Event Logging Commands Function Mode Syntax No logging on Default Setting Logging history Flash errors level 3 RAM warnings level 618 Logging Levels Hostipaddress The IP address of a syslog server Logging hostLogging facility Syntax No logging host hostipaddress Syntax Clear logging flash ram Logging trapClear logging Syntax Logging trap level no logging trap Syntax Show logging flash ram sendmail trap Show logging19 show logging flash/ram display description Show log Facility commandLogging trap command Syntax Show log flash ram login tail Following example shows sample messages stored in RAM Smtp Alert Commands21 Smtp Alert Commands Function Mode Logging sendmail host Syntax Logging sendmail level level Logging sendmail level This example will set the source email john@acme.com Logging sendmail source-emailLogging sendmail destination-email Syntax No logging sendmail source-email email-address Logging sendmail Syntax No logging sendmail Default SettingShow logging sendmail Sntp client Time Commands22 Time Commands Function Mode Syntax No sntp client Default Setting Sntp client 4-53 sntp poll 4-55 show sntp Sntp serverSntp server 4-54 sntp poll 4-55 show sntp Syntax Sntp server ip1 ip2 ip3 Sntp client Sntp pollShow sntp Syntax Sntp poll seconds no sntp poll Year Year 4-digit. Range Clock timezoneCalendar set Syntax Light unit System Status Commands23 System Status Commands Function Mode Show calendar Show startup-config Related Commands Show running-config Show startup-config Show system This command displays system informationShow users Show version Syntax No jumbo frame Default Setting Frame Size CommandsJumbo frame 25 Flash/File Commands Function Mode Flash/File CommandsCopy None Following example shows how to download a configuration file Delete Syntax Dir unit boot-rom config opcode filenameDir 26 File Directory Information WhichbootFollowing example shows how to display all file information Syntax whichboot unit Syntax Boot system unit boot-romconfig opcode filename Boot systemDir 4-68 whichboot 27 Authentication Commands Command Group Function Authentication CommandsAuthentication Sequence Authentication login Username for setting the local user names and passwords Authentication enable Show radius-server Shows the current Radius settings 29 Radius Client Commands Function ModeRadius Client Radius-server key Radius-server port Radius-server retransmit Radius-server timeout TACACS+ Client 30 Tacacs Commands Function ModeShow radius-server 10.11.12.13 Tacacs-server hostTacacs-server port Hostipaddress IP address of a TACACS+ server Show tacacs-server Tacacs-server keySyntax Tacacs-server key keystring no tacacs-server key Interface Configuration Ethernet Port Security Commands31 Port Security Commands Function Mode Status Disabled Action None Maximum Addresses Command Usage Be re-authenticated Dot1x timeout tx-period 802.1X Port Authentication32 802.1X Port Authentication Command Function Mode Acquire a new client Dot1x timeout re-authperiod Dot1x port-control Dot1x defaultDefault Command Mode Dot1x max-req Force-authorized Dot1x operation-modeSingle-host Dot1x re-authentication Dot1x re-authenticateDot1x timeout quiet-period Dot1x timeout tx-period Dot1x timeout re-authperiod Syntax Show dot1x statistics interface interface Show dot1xStatistics Displays dot1x status for each port State Current state including initialize, reauthenticate Authenticator State Machine Command Line Interface Access Control Lists Access Control List Commands Syntax No access-list ip standard extended aclname Access-list ip33 Access Control Lists Command Groups Function 34 IP ACLs Command Function Mode Syntax No permit deny any source bitmask host source Permit, deny Ip access-group 4-94 show ip access-listStandard ACL No permit deny tcp Access-list ip Extended ACL Syntax No ip access-group aclname Show ip access-listIp access-group Syntax Show ip access-list standard extended aclname Syntax No map access-list ip aclname cos cos-value Show ip access-groupMap access-list ip This command shows the ports assigned to IP ACLs 35 Egress Queue Priority Mapping Show map access-list ipQueue cos-map Show map access-list ip Syntax Show map access-list ip interface MAC ACLs Access-list mac36 MAC ACLs Command Function Mode Syntax No access-list mac aclname Syntax No permit deny Permit, deny MAC ACL Syntax Mac access-group aclname Show mac access-listMac access-group Syntax Show mac access-list aclname Syntax No map access-list mac aclname cos cos-value Show mac access-groupMap access-list mac This command shows the ports assigned to MAC ACLs 37 Egress Queue Priority Mapping Show map access-list macQueue cos-map Show map access-list mac Syntax Show map access-list mac interface ACL Information Show access-listShow access-group 38 ACL Information Command Function Mode 107 Snmp Commands39 Snmp Commands Function Mode Snmp-server community Syntax Snmp-server location text no snmp-server location Snmp-server contactSnmp-server location Syntax Snmp-server contact string no snmp-server contact Host Address None Snmp Version Snmp-server host Snmp-server enable traps Snmp-server enable trapsIssue authentication and link-up-down traps Show snmp This command checks the status of Snmp communications Port-channel channel-idRange Interface Commands40 Interface Commands Function Mode Interface Speed-duplex DescriptionSyntax Description string no description Negotiation Syntax No negotiation Default SettingNegotiation 4-110 capabilities Capabilities Following example configures port 11 to use autonegotiationCapabilities 4-111 speed-duplex Flowcontrol Syntax No flowcontrol Default SettingNegotiation 4-110 speed-duplex 4-109 flowcontrol Shutdown Syntax No shutdown Default Setting Clear counters Switchport broadcast packet-rateThis command clears statistics on an interface Port-channel channel-idRange Default Setting Syntax Show interfaces status interface This command displays the status for an interfaceShow interfaces status Following example clears statistics on port Shows the counters for all interfaces This command displays interface statisticsShow interfaces counters Syntax Show interfaces counters interface Syntax Show interfaces switchport interface Show interfaces switchportShows all interfaces 41 Interfaces Switchport Statistics Port monitor Mirror Port Commands42 Mirror Port Commands Function Mode Interface Configuration Ethernet, destination port Syntax Show port monitor interface This command displays mirror informationFollowing shows mirroring configured from port 6 to port Show port monitor Actual rate limit = Rate limit level * Granularity Rate Limit Commands43 Rate Limit Commands Function Mode Rate-limit Show rate-limit Global Configuration Ethernet, Port ChannelUse this command to display the rate limit granularity Rate-limit granularity 44 Link Aggregation Commands Link Aggregation Commands Channel-id- Trunk index Range Channel-groupGuidelines for Creating Trunks Syntax Channel-group channel-idno channel-group Lacp Syntax No lacp Default SettingFollowing example creates trunk 1 and then adds port 32768 Lacp system-priority Lacp admin-keyEthernet Interface Interface Configuration Port Channel Lacp admin-key Port Channel Lacp port-priority This command displays Lacp information Badly formed PDU or an illegal value of Protocol Subtype Port Channel all45 show lacp counters display description Type 46 show lacp internal display description 47 show lacp neighbors display description 49 Address Table Commands Function Mode Address Table Commands48 show lacp sysid display description Mac-address- MAC address Mac-address-table staticVlan-id- Vlan ID Range Show mac-address-table Clear mac-address-table dynamicMac-address- MAC address Mask Bits to match in the address Show mac-address-table aging-time Mac-address-table aging-time Spanning tree is enabled Spanning Tree Commands50 Spanning Tree Commands Function Mode Syntax No spanning-tree Default Setting Syntax Spanning-tree mode stp rstp no spanning-tree mode Spanning-tree modeRstp Spanning-tree hello-time Spanning-tree forward-time Spanning-tree max-age Spanning-tree pathcost method Spanning-tree priorityLong method Count The transmission limit in seconds. Range This command limits the maximum transmission rate for BPDUsSpanning-tree transmission-limit Spanning-tree cost Priority The priority for a port. Range 0-240, in steps Spanning-tree port-priority128 Spanning-tree edge-port Syntax No spanning-tree edge-port Default Setting Spanning-tree portfast Syntax No spanning-tree portfast Default SettingSpanning-tree link-type Syntax Spanning-tree protocol-migration interface Port-channel channel-idRange Command ModeSpanning-tree protocol-migration Auto Show spanning-tree This command shows the configuration for the spanning treeSyntax Show spanning-tree interface 148 Editing Vlan Groups Vlan Commands51 VLANs Command Groups Function 52 Editing Vlan Groups Command Function Mode Show vlan By default only Vlan 1 exists and is activeVlan Database Configuration Vlan Interface vlan Configuring Vlan Interfaces53 Configuring Vlan Interfaces Command Function Mode Interface vlan Switchport acceptable-frame-types Switchport modeSwitchport acceptable-frame-types All ports are in hybrid mode with the Pvid set to Vlan Syntax No switchport ingress-filtering Default Setting Switchport ingress-filtering Switchport native vlan Switchport allowed vlan 54 Show Vlan Commands Function Mode Switchport forbidden vlanDisplaying Vlan Information Shows all VLANs This command shows Vlan informationFollowing example shows how to display information for Vlan Show vlan 55 Private Vlan Commands Configuring Private VLANs Private-vlan Vlan Configuration No private-vlan primary-vlan-idassociation Private vlan association Secondary-vlan-id- ID of secondary VLAN. Range Switchport mode private-vlanSwitchport private-vlan host-association Normal Vlan Isolated-vlan-id- ID of secondary VLAN. Range Switchport private-vlan isolated Show vlan private-vlan Switchport private-vlan mappingSyntax Show vlan private-vlan community isolated primary Bridge-ext gvrp Gvrp and Bridge Extension Commands56 Gvrp and Bridge Extension Commands Function Mode Syntax No bridge-ext gvrp Default Setting Syntax No switchport gvrp Default Setting Switchport gvrpShow bridge-ext Syntax Show gvrp configuration interface Show gvrp configurationGarp timer This command shows if Gvrp is enabled Syntax Show garp timer interface Show garp timerShows all Garp timers 58 Priority Commands Layer Function Mode Priority CommandsPriority Commands Layer 57 Priority Commands Command Groups Function Switchport priority default Queue modeSyntax Queue mode strict wrr no queue mode Queue bandwidth Queue bandwidth weight1...weight3 no queue bandwidth Queue cos-map 59 Default CoS Priority Levels Show queue cos-map Show queue modeThis command shows the current queue mode Show queue bandwidth Show queue cos-map This command shows the class of service priority mapSyntax Show queue cos-map interface 101 Priority Commands Layer 360 Priority Commands Layer 3 Function Mode Syntax No map ip port Default Setting Syntax No map ip precedence Default Setting Following example shows how to map Http traffic to CoS value 61 Mapping IP Precedence Values CoS Value Command Mode List below shows the default priority mapping Syntax No map ip dscp Default Setting Priority Commands Map ip dscp Global Configuration 62 IP Dscp to CoS Vales IP Dscp Value CoS Value Use this command to show the IP port priority mapSyntax Show map ip port interface Show map ip precedence This command shows the IP precedence priority mapSyntax Show map ip precedence interface Show map ip dscp This command shows the IP Dscp priority mapSyntax Show map ip dscp interface 64 Igmp Snooping Commands Function Mode Multicast Filtering CommandsIgmp Snooping Commands 63 Multicast Filtering Commands Command Groups Function Ip igmp snooping vlan static Syntax No ip igmp snooping Default SettingFollowing example enables Igmp snooping Ip igmp snooping Show ip igmp snooping Following configures the switch to use Igmp VersionThis command shows the Igmp snooping configuration Ip igmp snooping version This command shows known multicast addresses Following shows the current Igmp snooping configurationShow mac-address-table multicast Ip igmp snooping querier Igmp Query Commands Layer65 Igmp Query Commands Layer Function Mode Syntax No ip igmp snooping querier Default Setting Ip igmp snooping query-max-response-time Following shows how to configure the query count toIp igmp snooping query-interval Times Ip igmp snooping query-max-response-time Seconds The report delay advertised in Igmp queries. RangeIp igmp snooping router-port-expire-time Syntax No ip igmp snooping vlan vlan-idmrouter interface Static Multicast Routing Commands66 Static Multicast Routing Commands Function Mode Ip igmp snooping vlan mrouter Multicast router port types displayed include Static Displays multicast router ports for all configured VLANsShow ip igmp snooping mrouter Syntax Show ip igmp snooping mrouter vlan vlan-id Ip address IP Interface Commands67 IP Interface Commands Function Mode Interface Configuration Vlan Following example defines a default gateway for this device Ip default-gatewaySyntax Ip default-gateway gateway no ip default-gateway Gateway IP address of the default gateway Show ip interface This command submits a Bootp or Dhcp client requestThis command displays the settings of an IP interface Ip dhcp restart Syntax Ping host size size count count This command has no default for the hostShow ip redirects Ping 194 Software Features Appendix a Software Specifications Groups 1, 2, 3, 9 Statistics, History, Alarm, Event Management FeaturesStandards Management Information Bases Software Specifications Symptom Action Table B-1 Troubleshooting Chart Using System Logs Differentiated Services Code Point Service Dscp Access Control List ACLBoot Protocol Bootp Class of Service CoS Group Attribute Registration Protocol Garp Garp Vlan Registration Protocol GvrpGeneric Attribute Registration Protocol Garp Generic Multicast Registration Protocol Gmrp In-Band Management Igmp SnoopingIgmp Query Internet Group Management Protocol Igmp MD5 Message-Digest Algorithm Multicast SwitchingPort Authentication Remote Authentication Dial-in User Service Radius Simple Network Management Protocol Snmp Remote Monitoring RmonRapid Spanning Tree Protocol Rstp Secure Shell SSH Virtual LAN Vlan User Datagram Protocol UDPXModem Numerics Gateway, default 3-12,4-191Downloading software 3-16 Index Index-3 Index-4 Page GSW-2692 E072006-R01