LevelOne GSW-2692 manual IP Precedence Priority

3 Configuring the Switch

Web – Click Priority, IP Precedence Priority. Select an entry from the IP Precedence Priority Table, enter a value in the Class of Service Value field, and then click Apply.

Figure 3-77 IP Precedence Priority

CLI – The following example globally enables IP Precedence service on the switch, maps IP Precedence value 1 to CoS value 0 (on port 1), and then displays the IP Precedence settings.

Console(config)#map		ip precedence			4-174
Console(config)#interface				ethernet 1/1	4-108
Console(config-if)#map ip				precedence 1 cos 0	4-176
Console(config-if)#end
Console#show map ip		precedence ethernet 1/1			4-179
Precedence	mapping status: enabled
Port	Precedence COS
---------	---------- ---
Eth 1/ 1		0	0
Eth 1/ 1		1	0
Eth 1/ 1		2	2
Eth 1/ 1		3	3
Eth 1/ 1		4	4
Eth 1/ 1		5	5
Eth 1/ 1		6	6
Eth 1/ 1		7	7
Console#

*Mapping specific values for IP Precedence is implemented as an interface configuration command, but any changes will apply to the all interfaces on the switch.

3-130