LevelOne GSW-2692 manual System Status Commands, Show calendar, Syntax Light unit unit

System Management Commands 4

Default Setting

None

Command Mode

Privileged Exec

Example

This example shows how to set the system clock to 15:12:34, April 1st, 2004.

Console#calendar set 15 12 34 1 April 2004

Console#

show calendar

This command displays the system clock.

Default Setting

None

Command Mode

Normal Exec, Privileged Exec

Example

Console#show calendar 15:12:43 April 1 2004

Console#

System Status Commands

Table 4-23 System Status Commands

Command	Function	Mode	Page
light unit	Displays the unit ID of a switch using its front-panel LED	NE, PE	4-57
	indicators
show startup-config	Displays the contents of the configuration file (stored in flash	PE	4-58
	memory) that is used to start up the system
show running-config	Displays the configuration data currently in use	PE	4-60
show system	Displays system information	NE, PE	4-62
show users	Shows all active console and Telnet sessions, including user	NE, PE	4-62
	name, idle time, and IP address of Telnet clients
show version	Displays version information for the system	NE, PE	4-63

light unit

This command displays the unit ID of a switch using its front-panel LED indicators.

Syntax

light unit [unit]

unit - specifies a unit in a switch stack to light the panel LEDs

4-57