LevelOne GSW-2692 manual Dot1x default, Dot1x max-req, Dot1x port-control, Default Command Mode

4 Command Line Interface

dot1x default

This command sets all configurable dot1x global and port settings to their default values.

Command Mode

Global Configuration

Example

Console(config)#dot1x default

Console(config)#

dot1x max-req

This command sets the maximum number of times the switch port will retransmit an EAP request/identity packet to the client before it times out the authentication session. Use the no form to restore the default.

Syntax

dot1x max-req count no dot1x max-req

count – The maximum number of requests (Range: 1-10)

Default

2

Command Mode

Interface Configuration

Example

Console(config)#interface eth 1/2

Console(config-if)#dot1x max-req 2

Console(config-if)#

dot1x port-control

This command sets the dot1x mode on a port interface. Use the no form to restore the default.

Syntax

dot1x port-control {auto force-authorized force-unauthorized}no dot1x port-control

•auto – Requires a dot1x-aware connected client to be authorized by the RADIUS server. Clients that are not dot1x-aware will be denied access.

•force-authorized– Configures the port to grant access to all clients, either dot1x-aware or otherwise.

•force-unauthorized– Configures the port to deny access to all clients, either dot1x-aware or otherwise.

4-82