LevelOne GSW-2692 manual Show system, Show users, This command displays system information

4 Command Line Interface

show system

This command displays system information.

Default Setting

None

Command Mode

Normal Exec, Privileged Exec

Command Usage

•For a description of the items shown by this command, refer to “Displaying System Information” on page 3-8.

•The POST results should all display “PASS.” If any POST test indicates “FAIL,” contact your distributor for assistance.

Example

Console#show system

System description: GSW-2692 Layer2 Stackable Intelligent Switch

System OID string: 1.3.6.1.4.1.22426.1.4.2 System information

System Up time:		0 days, 0 hours, 0 minutes, and 7.18 seconds
System Name:		[NONE]
System Location:		[NONE]
System Contact:		[NONE]
MAC	address:	00-90-CC-55-44-32
Web	server:	enabled
Web	server port:	80
Web	secure server:	enabled
Web	secure server port:	443
Telnet server		: enable
Telnet port		: 23
Jumbo Frame :		Disabled
POST result
POST	result
UART	LOOP BACK Test	PASS
DRAM	Test	PASS
Timer Test		PASS
PCI Device 1 Test		PASS
PCI Device 2 Test		PASS
Switch Int Loopback test		.....PASS
Done	All Pass.

Console#

show users

Shows all active console and Telnet sessions, including user name, idle time, and IP address of Telnet client.

Default Setting

None

Command Mode

Normal Exec, Privileged Exec

4-62