LevelOne GSW-2692 manual Logging sendmail host, Smtp Alert Commands Function Mode

System Management Commands 4

Example

The following example shows sample messages stored in RAM.

Console#show		log ram
[5]	00:01:06	2001-01-01
	"STA root	change notification."
	level: 6,	module: 6,	function: 1, and event no.: 1
[4]	00:01:00	2001-01-01
	"STA root	change notification."
	level: 6,	module: 6,	function: 1, and event no.: 1
[3]	00:00:54	2001-01-01
	"STA root	change notification."
	level: 6,	module: 6,	function: 1, and event no.: 1
[2]	00:00:50	2001-01-01
	"STA topology change		notification."
	level: 6, module: 6,		function: 1, and event no.: 1
[1]	00:00:48	2001-01-01
	"VLAN 1 link-up notification."
	level: 6, module: 6,		function: 1, and event no.: 1
Console#

SMTP Alert Commands

These commands configure SMTP event handling, and forwarding of alert messages to the specified SMTP servers and email recipients.

Table 4-21 SMTP Alert Commands

Command	Function	Mode	Page
logging sendmail host	SMTP servers to receive alert messages	GC	4-49
logging sendmail level	Severity threshold used to trigger alert messages	GC	4-50
logging sendmail	Email address used for “From” field of alert messages	GC	4-51
source-email
logging sendmail	Email recipients of alert messages	GC	4-51
destination-email
logging sendmail	Enables SMTP event handling	GC	4-52
show logging sendmail	Displays SMTP event handler settings	NE, PE	4-52

logging sendmail host

This command specifies SMTP servers that will be sent alert messages. Use the no form to remove an SMTP server.

Syntax

[no] logging sendmail host ip_address

ip_address - IP address of an SMTP server that will be sent alert messages for event handling.

Default Setting

None

4-49