LevelOne GSW-2692 manual Displaying Current VLANs Command Attributes CLI

3 Configuring the Switch

Web – Click VLAN, 802.1Q VLAN, Current Table. Select any ID from the scroll-down list.

Figure 3-62 Displaying Current VLANs

Command Attributes (CLI)

•VLAN – ID of configured VLAN (1-4094, no leading zeroes).

•Type – Shows how this VLAN was added to the switch.

-Dynamic: Automatically learned via GVRP.

-Static: Added as a static entry.

•Name – Name of the VLAN (1 to 32 characters).

•Status – Shows if this VLAN is enabled or disabled.

-Active: VLAN is operational.

-Suspend: VLAN is suspended; i.e., does not pass packets.

•Ports / Channel groups – Shows the VLAN interface members.

CLI – Current VLAN information can be displayed with the following command.

Console#show vlan id 1					4-157
Vlan ID:	1
Type:	Static
Name:	DefaultVlan
Status:	Active
Ports/Port Channel:	Eth1/ 1(S)	Eth1/ 2(S)	Eth1/ 3(S)	Eth1/ 4(S)	Eth1/ 5(S)
	Eth1/ 6(S)	Eth1/ 7(S)	Eth1/ 8(S)	Eth1/ 9(S)	Eth1/10(S)
	Eth1/11(S)	Eth1/12(S)	Eth1/13(S)	Eth1/14(S)	Eth1/15(S)
	Eth1/16(S)	Eth1/17(S)	Eth1/18(S)	Eth1/19(S)	Eth1/20(S)
	Eth1/21(S)	Eth1/22(S)	Eth1/23(S)	Eth1/24(S)	Eth1/25(S)
	Eth1/26(S)
Console#

3-110