Address Table Settings

3 Configuring the Switch

CLI – This example shows statistics for port 13.

Console#show interfaces counters ethernet 1/13

4-116

Ethernet 1/13 Iftable stats:

Octets input: 868453, Octets output: 3492122

Unicast input: 7315, Unitcast output: 6658

Discard input: 0, Discard output: 0

Error input: 0, Error output: 0

Unknown protos input: 0, QLen output: 0 Extended iftable stats:

Multi-cast input: 0, Multi-cast output: 17027

Broadcast input: 231, Broadcast output: 7 Ether-like stats:

Alignment errors: 0, FCS errors: 0

Single Collision frames: 0, Multiple collision frames: 0

SQE Test errors: 0, Deferred transmissions: 0

Late collisions: 0, Excessive collisions: 0

Internal mac transmit errors: 0, Internal mac receive errors: 0

Frame too longs: 0, Carrier sense errors: 0

Symbol errors: 0 RMON stats:

Drop events: 0, Octets: 4422579, Packets: 31552

Broadcast pkts: 238, Multi-cast pkts: 17033

Undersize pkts: 0, Oversize pkts: 0

Fragments: 0, Jabbers: 0

CRC align errors: 0, Collisions: 0

Packet size <= 64 octets: 25568, Packet size 65 to 127 octets: 1616

Packet size 128 to 255 octets: 1249, Packet size 256 to 511 octets: 1449

Packet size 512 to 1023 octets: 802, Packet size 1024 to 1518 octets: 871 Console#

Switches store the addresses for all known devices. This information is used to pass traffic directly between the inbound and outbound ports. All the addresses learned by monitoring traffic are stored in the dynamic address table. You can also manually configure static addresses that are bound to a specific port.

Setting Static Addresses

A static address can be assigned to a specific interface on this switch. Static addresses are bound to the assigned interface and will not be moved. When a static address is seen on another interface, the address will be ignored and will not be written to the address table.

Command Attributes

•Static Address Counts7 – The number of manually configured addresses.

•Current Static Address Table – Lists all the static addresses.

•Interface – Port or trunk associated with the device assigned a static address.

•MAC Address – Physical address of a device mapped to this interface.

•VLAN – ID of configured VLAN (1-4094).

7. Web only.

3-90

GSW-2692 specifications

The LevelOne GSW-2692 is an advanced Layer 2 Gigabit Ethernet switch that is designed to cater to the networking needs of both small and medium-sized enterprises. Highly regarded for its reliability and performance, the GSW-2692 offers 24 Gigabit Ethernet ports, enabling seamless and high-speed data transfers across connected devices. With its robust design and versatile capabilities, this switch has earned its place as an essential component in modern IT infrastructure.

One of the standout features of the GSW-2692 is its extensive support for advanced networking technologies. The switch includes support for IEEE 802.1Q VLAN tagging, which allows users to create separate virtual networks for improved traffic management and enhanced security. By segregating network traffic, businesses can optimize bandwidth usage and reduce congestion, contributing to overall increased network performance.

Additionally, the GSW-2692 supports Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP), ensuring loop-free network topology. This capability is crucial in larger networking environments where multiple switches are interconnected, as it prevents broadcast storms and enhances network resilience. The switch also includes features such as port mirroring, which provides administrators with the capability to monitor network traffic in real-time for troubleshooting and analysis.

Power over Ethernet (PoE) support is another significant advantage of the GSW-2692. With PoE functionality, it enables the switch to deliver electrical power along with data to connected devices such as IP cameras, VoIP phones, and wireless access points, eliminating the need for additional power sources and simplifying installations.

In terms of physical characteristics, the LevelOne GSW-2692 is designed for efficient heat dissipation and features a fanless design, which ensures silent operation. Its desktop or rack-mountable options make it flexible for various installation environments. The switch also features a web-based management interface, which simplifies the configuration and monitoring processes, allowing for intuitive management of network settings.

Overall, the LevelOne GSW-2692 stands out as a feature-rich, reliable, and high-performance networking solution that meets the demands of modern enterprises. Its combination of advanced technologies, scalability, and ease of use makes it an excellent choice for businesses looking to enhance their network infrastructure.

LevelOne GSW-2692 manual Address Table Settings, Setting Static Addresses

Models: GSW-2692

CLI – This example shows statistics for port 13.

4-116