Manuals / LevelOne / Computer Equipment / Switch

LevelOne GSW-2692 manual Show ip access-list, Ip access-group, Syntax No ip access-group aclname

Models: GSW-2692

1 390

Download 390 pages 4.67 Kb

Page 272

Image 272

4 Command Line Interface

This permits all TCP packets from class C addresses 192.168.1.0 with the TCP control code set to “SYN.”

Console(config-ext-acl)#permit tcp 192.168.1.0 255.255.255.0 any control-flag 2 2

Console(config-ext-acl)#

Related Commands

access-list ip (4-90)

show ip access-list

This command displays the rules for configured IP ACLs.

Syntax

show ip access-list {standard extended} [acl_name]

•standard – Specifies a standard IP ACL.

•extended – Specifies an extended IP ACL.

•acl_name – Name of the ACL. (Maximum length: 16 characters)

Command Mode

Privileged Exec

Example

Console#show ip access-list standard IP standard access-list david:

permit host 10.1.1.21

permit 168.92.0.0 255.255.255.0 Console#

Related Commands

permit, deny 4-91

ip access-group (4-94)

ip access-group

This command binds a port to an IP ACL. Use the no form to remove the port.

Syntax

[no] ip access-group acl_name in

•acl_name – Name of the ACL. (Maximum length: 16 characters)

•in – Indicates that this list applies to ingress packets.

Default Setting

None

Command Mode

Interface Configuration (Ethernet)

4-94

Page 272

Image 272

LevelOne GSW-2692 manual Ip access-group, Syntax Show ip access-list standard extended aclname

GSW-2692 specifications

The LevelOne GSW-2692 is an advanced Layer 2 Gigabit Ethernet switch that is designed to cater to the networking needs of both small and medium-sized enterprises. Highly regarded for its reliability and performance, the GSW-2692 offers 24 Gigabit Ethernet ports, enabling seamless and high-speed data transfers across connected devices. With its robust design and versatile capabilities, this switch has earned its place as an essential component in modern IT infrastructure.

One of the standout features of the GSW-2692 is its extensive support for advanced networking technologies. The switch includes support for IEEE 802.1Q VLAN tagging, which allows users to create separate virtual networks for improved traffic management and enhanced security. By segregating network traffic, businesses can optimize bandwidth usage and reduce congestion, contributing to overall increased network performance.

Additionally, the GSW-2692 supports Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP), ensuring loop-free network topology. This capability is crucial in larger networking environments where multiple switches are interconnected, as it prevents broadcast storms and enhances network resilience. The switch also includes features such as port mirroring, which provides administrators with the capability to monitor network traffic in real-time for troubleshooting and analysis.

Power over Ethernet (PoE) support is another significant advantage of the GSW-2692. With PoE functionality, it enables the switch to deliver electrical power along with data to connected devices such as IP cameras, VoIP phones, and wireless access points, eliminating the need for additional power sources and simplifying installations.

In terms of physical characteristics, the LevelOne GSW-2692 is designed for efficient heat dissipation and features a fanless design, which ensures silent operation. Its desktop or rack-mountable options make it flexible for various installation environments. The switch also features a web-based management interface, which simplifies the configuration and monitoring processes, allowing for intuitive management of network settings.

Overall, the LevelOne GSW-2692 stands out as a feature-rich, reliable, and high-performance networking solution that meets the demands of modern enterprises. Its combination of advanced technologies, scalability, and ease of use makes it an excellent choice for businesses looking to enhance their network infrastructure.

Contents

LevelOne Page Contents Page Iii Command Line Interface Contents Page Vii Viii Contents Page Appendix a Software Specifications Xii Tables Xiii Xiv Figures Figures Lacp Configuration Xvi Feature Description Key FeaturesKey Features Description of Software Features Description of Software Features Introduction System Defaults System DefaultsFunction Parameter Default Password super System Defaults Function Parameter Client Enabled Clock Synchronization Disabled Introduction Connecting to the Switch Configuration Options Initial Configuration Required Connections Stack Operations Remote Connections Basic Configuration Console Connection Manual Configuration Setting PasswordsSetting an IP Address Dynamic Configuration Enabling Snmp Management Access Community Strings Saving Configuration Settings Trap Receivers Managing System Files Enter the name of the start-up file. Press Enter Initial Configuration Configuring the Switch Using the Web Interface Navigating the Web Browser Interface Home Configuration Options Action Panel DisplayButton Revert Apply Help Configuration Main MenuMain Menu Description System System Information ACL 105 Current Table109 114 Class-of-service value IP Dscp Priority Matching an ACL rule Igmp Snooping 135 Igmp Configuration120 129 Displaying System Information Field Attributes Expansion Slot 1/2 Combination RJ-45/SFP ports Displaying Switch Hardware/Software VersionsCLI Specify the hostname, location and contact information Switch Information Bridge Extension Configuration Displaying Bridge Extension Capabilities Command Attributes Setting the Switch’s IP AddressCLI Enter the following command Manual IP Configuration Using DHCP/BOOTP Dhcp IP Configuration Managing Firmware Downloading System Software from a Server Copy Firmware 10 Deleting Files Saving or Restoring Configuration Settings Downloading Configuration Settings from a Server 11 Downloading Configuration Settings for Startup Console Port Settings 13 Console Port Settings Telnet Settings 14 Enabling Telnet Configuring Event Logging System Log Configuration Logging Levels Level Severity Name Description Remote Log Configuration 16 Remote Logs Displaying Log Messages CLI This example shows the event message stored in RAM Sending Simple Mail Transfer Protocol Alerts 18 Enabling and Configuring Smtp Alerts Resetting the System 19 Resetting the System Setting the System Clock Configuring Sntp Setting the Time Zone 21 Setting the System Clock Simple Network Management Protocol Setting Community Access StringsAccess Mode 22 Configuring Snmp Specifying Trap Managers and Trap Types User Authentication Configuring User Accounts 24 Access Levels Configuring Local/Remote Logon Authentication Command Usage Radius Settings Tacacs Settings 25 Authentication Settings Configuring Https Https System Support Web Browser Operating System Replacing the Default Secure-site Certificate 26 Https Settings Configuring the Secure Shell User Authentication Generating the Host Key Pair 27 SSH Host-Key Settings Configuring the SSH Server SSH server includes basic settings for authentication Configuring Port Security 29 Configuring Port Security Configuring 802.1X Port Authentication Displaying 802.1X Global Settings 802.1X protocol provides client authenticationCLI This example shows the default global setting for Web Click Security, 802.1X, Information CLI This example enables 802.1X globally for the switch Configuring 802.1X Global SettingsConfiguring Port Settings for 32 802.1X Port Configuration Authorized Consoleconfig#interface ethernet 1/2 Parameter Description Displaying 802.1X Statistics802.1X Statistics Filtering IP Addresses for Management Access CLI This example displays the 802.1X statistics for port 34 IP Filter CLI This example allows Snmp access for a specific client Access Control ListsConfiguring Access Control Lists Setting the ACL Name and Type CLI This example creates a standard IP ACL named david Configuring a Standard IP ACL 36 ACL Configuration Standard IP Configuring an Extended IP ACL 37 ACL Configuration Extended IP Configuring a MAC ACL 38 ACL Configuration MAC Binding a Port to an Access Control List 39 Binding a Port to an ACL Field Attributes Web Port ConfigurationDisplaying Connection Status Web Click Port, Port Information or Trunk Information 40 Displaying Port/Trunk Information Field Attributes CLI Configuring Interface Connections Current Status 41 Port/Trunk Configuration Creating Trunk Groups Statically Configuring a Trunk 42 Configuring Port Trunks Enabling Lacp on Selected Ports 124 43 Lacp Configuration 125 Configuring Lacp Parameters Dynamically Creating a Port Channel 44 Lacp Port Configuration Displaying Lacp Port Counters You can display statistics for Lacp protocol messagesLacp Port Counters Field Description CLI The following example displays Lacp counters Protocols Ethernet TypeLACPDUs Illegal Pkts Displaying Lacp Settings and Status for the Local Side Lacp Internal Configuration Information 46 Lacp Port Internal Information Displaying Lacp Settings and Status for the Remote Side Lacp Neighbor Configuration Information Field Description Console#show Lacp 1 neighbors Setting Broadcast Storm Thresholds 48 Port Broadcast Control Configuring Port Mirroring 114 Configuring Rate Limits 49 Mirror Port Configuration Rate Limit Configuration Rate Limit Granularity 51 Output Rate Limit Port Configuration Showing Port Statistics Port Statistics Port Statistics Or alignment error Fragments 52 Port Statistics CLI This example shows statistics for port Address Table SettingsSetting Static Addresses 53 Configuring a Static Address Table Displaying the Address Table 54 Configuring a Dynamic Address Table CLI This example sets the aging time to 300 seconds Spanning Tree Algorithm ConfigurationChanging the Aging Time Displaying Global Settings Spanning Tree Algorithm Configuration Web Click Spanning Tree, STA, Information 56 Displaying Spanning Tree Information Configuring Global Settings Global settings apply to the entire switch Configuration Settings for Rstp 57 Configuring Spanning Tree Displaying Interface Settings AD B 58 Displaying Spanning Tree Information CLI This example shows the STA attributes for port Configuring Interface Settings 59 Configuring Spanning Tree per Port CLI This example sets STA attributes for port Vlan Configuration Ieee 802.1Q VLANs VA Vlan Aware VU Vlan Unaware Forwarding Tagged/Untagged Frames Enabling or Disabling Gvrp Global Setting CLI This example enables Gvrp for the switchDisplaying Basic Vlan Information Web Click VLAN, 802.1Q VLAN, Basic Information Command Attributes Web Displaying Current VLANs 62 Displaying Current VLANs Command Attributes CLI 63 Configuring a Vlan Static List Creating VLANs Adding Static Members to VLANs Vlan Index CLI This example creates a new Vlan 64 Configuring a Vlan Static Table Adding Static Members to VLANs Port Index 65 Vlan Static Membership by Port Configuring Vlan Behavior for Interfaces 66 Configuring VLANs per Port Private VLANs Displaying Current Private VLANs 67 Private Vlan Information Each community Vlan must be associated with a primary Vlan Configuring Private VLANsAssociating VLANs Displaying Private Vlan Interface Information 69 Private Vlan Association Configuring Private Vlan Interfaces 70 Private Vlan Port Information 71 Private Vlan Port Configuration Setting the Default Priority for Interfaces Class of Service ConfigurationLayer 2 Queue Settings Port Priority Configuration CLI This example assigns a default priority of 5 to port Mapping CoS Values to Egress Queues 10 Mapping CoS Values to Egress Queues11 CoS Priority Levels Priority Level Traffic Type 73 Traffic Classes Selecting the Queue Mode Setting the Service Weight for Traffic Classes Layer 3/4 Priority Settings Mapping Layer 3/4 Priorities to CoS Values 12 Mapping IP Precedence Priority Level Traffic Type Selecting IP Precedence/DSCP PriorityMapping IP Precedence 77 IP Precedence Priority 10, 12, 14 18, 20, 22 26, 28, 30, 32, 34 38, 40 Mapping Dscp Priority13 Mapping Dscp Priority Values IP Dscp Value CoS Value Mapping IP Port Priority 79 IP Port Priority Status Mapping CoS Values to ACLs 14 Egress Queue Priority Mapping 81 ACL CoS Priority Multicast Filtering Layer 2 Igmp Snooping and Query Configuring Igmp Snooping and Query Parameters 82 Igmp Configuration Displaying Interfaces Attached to a Multicast Router Specifying Static Interfaces for a Multicast Router 83 Multicast Router Port Information 84 Static Multicast Router Port Configuration Displaying Port Members of Multicast Services 85 IP Multicast Registration Table Assigning Ports to Multicast Services 86 Igmp Member Port Table Vlan Telnet Connection Using the Command Line InterfaceAccessing the CLI Command Line Interface Entering Commands Command CompletionGetting Help on Commands Keywords and Arguments Showing Commands Negating the Effect of Commands Using Command HistoryUnderstanding Command Modes Command Modes Exec Commands Configuration Commands Configuration Modes Command Prompt Consoleconfig-if# 108 Keystroke Function Command Line ProcessingCommand Line Processing Command Groups Command Groups Description Line Commands Line Login Related CommandsSyntax Login local no login Example Password Username 4-26 passwordSyntax Password 0 7 password no password No password is specified Syntax Exec-timeout seconds no exec-timeout Timeout login responseExec-timeout Password-thresh Silent-time Timeout login responseSyntax Password-thresh threshold no password-thresh Default value is three attempts Silent-time DatabitsSyntax Silent-time seconds no silent-time Syntax Databits 7 8 no databits Parity Syntax Parity none even odd no parity Speed StopbitsSyntax Speed bps no speed Syntax Stopbits 1 Disconnect Show lineSyntax Disconnect session-id Syntax Show line console vty General Commands EnableTo show all lines, enter this command General Commands Function Mode Disable Disable Enable passwordEnable Level Configure Show history Reload End This command exits the configuration program This example shows how to quit a CLI sessionExit Quit Prompt System Management CommandsDevice Designation Commands User Access Commands User Access Commands Function ModeHostname Syntax Hostname name no hostname Username 10 Default Login Settings Username Access-level PasswordGuest Admin Enable 4-19 authentication enable Enable passwordDefault is level Default password is super IP Filter Commands 11 IP Filter Commands Function ModeManagement Management Show management Ip http server Web Server CommandsIp http port Syntax No ip http secure-server Default Setting Ip http secure-serverIp http port 13 Https System Support Web Browser Operating System Ip http secure-port Ip http secure-port Copy tftp https-certificatePortnumber The UDP port used for HTTPS/SSL. Range Ip http secure-server Ip telnet server Telnet Server CommandsIp telnet port Secure Shell Commands 15 SSH Commands Function ModeIp telnet port Sets the SSH server key size Copy tftp public-key System Management Commands Ip ssh crypto host-key generate 4-39 show ssh Syntax No ip ssh server Default SettingIp ssh server Ip ssh timeout Ip ssh authentication-retriesSyntax Ip ssh timeout seconds no ip ssh timeout Exec-timeout 4-13 show ip ssh Syntax Delete public-key username dsa rsa Ip ssh server-key sizeDelete public-key Ip ssh crypto host-key generate Ip ssh crypto zeroizeSyntax Ip ssh crypto host-key generate dsa rsa Syntax Ip ssh crypto zeroize dsa rsa Syntax Ip ssh save host-key dsa rsa Ip ssh save host-keyShow ip ssh Show ssh 16 show ssh display description Show public-key Syntax Show public-key user username hostUsername Name of an SSH user. Range 1-8 characters Shows all public keys Event Logging Commands 17 Event Logging Commands Function ModeSyntax No logging on Default Setting Logging on 18 Logging Levels Flash errors level 3 RAM warnings level 6Logging history Logging host Logging facilitySyntax No logging host hostipaddress Hostipaddress The IP address of a syslog server Logging trap Clear loggingSyntax Logging trap level no logging trap Syntax Clear logging flash ram 19 show logging flash/ram display description Show loggingSyntax Show logging flash ram sendmail trap Facility command Logging trap commandSyntax Show log flash ram login tail Show log Smtp Alert Commands 21 Smtp Alert Commands Function ModeLogging sendmail host Following example shows sample messages stored in RAM Logging sendmail level Syntax Logging sendmail level level Logging sendmail source-email Logging sendmail destination-emailSyntax No logging sendmail source-email email-address This example will set the source email john@acme.com Show logging sendmail Syntax No logging sendmail Default SettingLogging sendmail Time Commands 22 Time Commands Function ModeSyntax No sntp client Default Setting Sntp client Sntp server Sntp server 4-54 sntp poll 4-55 show sntpSyntax Sntp server ip1 ip2 ip3 Sntp client 4-53 sntp poll 4-55 show sntp Sntp poll Show sntpSyntax Sntp poll seconds no sntp poll Sntp client Clock timezone Calendar setSyntax Year Year 4-digit. Range System Status Commands 23 System Status Commands Function ModeShow calendar Light unit Show startup-config Related Commands Show running-config Show startup-config Show users This command displays system informationShow system Show version Jumbo frame Frame Size CommandsSyntax No jumbo frame Default Setting Copy Flash/File Commands25 Flash/File Commands Function Mode None Following example shows how to download a configuration file Dir Syntax Dir unit boot-rom config opcode filenameDelete Whichboot Following example shows how to display all file informationSyntax whichboot unit 26 File Directory Information Dir 4-68 whichboot Boot systemSyntax Boot system unit boot-romconfig opcode filename Authentication Commands Authentication SequenceAuthentication login 27 Authentication Commands Command Group Function Authentication enable Username for setting the local user names and passwords Radius Client 29 Radius Client Commands Function ModeShow radius-server Shows the current Radius settings Radius-server port Radius-server key Radius-server timeout Radius-server retransmit Show radius-server 30 Tacacs Commands Function ModeTACACS+ Client Tacacs-server host Tacacs-server portHostipaddress IP address of a TACACS+ server 10.11.12.13 Syntax Tacacs-server key keystring no tacacs-server key Tacacs-server keyShow tacacs-server Port Security Commands 31 Port Security Commands Function ModeStatus Disabled Action None Maximum Addresses Interface Configuration Ethernet Command Usage 802.1X Port Authentication 32 802.1X Port Authentication Command Function ModeAcquire a new client Dot1x timeout re-authperiod Be re-authenticated Dot1x timeout tx-period Dot1x default Default Command ModeDot1x max-req Dot1x port-control Single-host Dot1x operation-modeForce-authorized Dot1x timeout quiet-period Dot1x re-authenticateDot1x re-authentication Dot1x timeout re-authperiod Dot1x timeout tx-period Statistics Displays dot1x status for each port Show dot1xSyntax Show dot1x statistics interface interface Authenticator State Machine State Current state including initialize, reauthenticate Command Line Interface Access Control List Commands Access Control Lists Access-list ip 33 Access Control Lists Command Groups Function34 IP ACLs Command Function Mode Syntax No access-list ip standard extended aclname Standard ACL Permit, deny Ip access-group 4-94 show ip access-listSyntax No permit deny any source bitmask host source Access-list ip No permit deny tcp Extended ACL Show ip access-list Ip access-groupSyntax Show ip access-list standard extended aclname Syntax No ip access-group aclname Show ip access-group Map access-list ipThis command shows the ports assigned to IP ACLs Syntax No map access-list ip aclname cos cos-value Show map access-list ip Queue cos-map Show map access-list ipSyntax Show map access-list ip interface 35 Egress Queue Priority Mapping Access-list mac 36 MAC ACLs Command Function ModeSyntax No access-list mac aclname MAC ACLs Permit, deny MAC ACL Syntax No permit deny Show mac access-list Mac access-groupSyntax Show mac access-list aclname Syntax Mac access-group aclname Show mac access-group Map access-list macThis command shows the ports assigned to MAC ACLs Syntax No map access-list mac aclname cos cos-value Show map access-list mac Queue cos-map Show map access-list macSyntax Show map access-list mac interface 37 Egress Queue Priority Mapping Show access-list Show access-group38 ACL Information Command Function Mode ACL Information Snmp Commands 39 Snmp Commands Function ModeSnmp-server community 107 Snmp-server contact Snmp-server locationSyntax Snmp-server contact string no snmp-server contact Syntax Snmp-server location text no snmp-server location Snmp-server host Host Address None Snmp Version Issue authentication and link-up-down traps Snmp-server enable trapsSnmp-server enable traps This command checks the status of Snmp communications Show snmp Interface Commands 40 Interface Commands Function ModeInterface Port-channel channel-idRange Syntax Description string no description DescriptionSpeed-duplex Negotiation 4-110 capabilities Syntax No negotiation Default SettingNegotiation Capabilities 4-111 speed-duplex Following example configures port 11 to use autonegotiationCapabilities Negotiation 4-110 speed-duplex 4-109 flowcontrol Syntax No flowcontrol Default SettingFlowcontrol Syntax No shutdown Default Setting Shutdown Switchport broadcast packet-rate This command clears statistics on an interfacePort-channel channel-idRange Default Setting Clear counters This command displays the status for an interface Show interfaces statusFollowing example clears statistics on port Syntax Show interfaces status interface This command displays interface statistics Show interfaces countersSyntax Show interfaces counters interface Shows the counters for all interfaces Shows all interfaces Show interfaces switchportSyntax Show interfaces switchport interface 41 Interfaces Switchport Statistics Mirror Port Commands 42 Mirror Port Commands Function ModeInterface Configuration Ethernet, destination port Port monitor This command displays mirror information Following shows mirroring configured from port 6 to portShow port monitor Syntax Show port monitor interface Rate Limit Commands 43 Rate Limit Commands Function ModeRate-limit Actual rate limit = Rate limit level * Granularity Global Configuration Ethernet, Port Channel Use this command to display the rate limit granularityRate-limit granularity Show rate-limit Link Aggregation Commands 44 Link Aggregation Commands Channel-group Guidelines for Creating TrunksSyntax Channel-group channel-idno channel-group Channel-id- Trunk index Range Following example creates trunk 1 and then adds port Syntax No lacp Default SettingLacp Lacp system-priority 32768 Lacp admin-keyEthernet Interface Lacp admin-key Port Channel Interface Configuration Port Channel This command displays Lacp information Lacp port-priority Port Channel all 45 show lacp counters display descriptionType Badly formed PDU or an illegal value of Protocol Subtype 46 show lacp internal display description 47 show lacp neighbors display description 48 show lacp sysid display description Address Table Commands49 Address Table Commands Function Mode Vlan-id- Vlan ID Range Mac-address-table staticMac-address- MAC address Mac-address- MAC address Mask Bits to match in the address Clear mac-address-table dynamicShow mac-address-table Mac-address-table aging-time Show mac-address-table aging-time Spanning Tree Commands 50 Spanning Tree Commands Function ModeSyntax No spanning-tree Default Setting Spanning tree is enabled Rstp Spanning-tree modeSyntax Spanning-tree mode stp rstp no spanning-tree mode Spanning-tree forward-time Spanning-tree hello-time Spanning-tree max-age Long method Spanning-tree prioritySpanning-tree pathcost method This command limits the maximum transmission rate for BPDUs Spanning-tree transmission-limitSpanning-tree cost Count The transmission limit in seconds. Range 128 Spanning-tree port-priorityPriority The priority for a port. Range 0-240, in steps Syntax No spanning-tree edge-port Default Setting Spanning-tree edge-port Spanning-tree link-type Syntax No spanning-tree portfast Default SettingSpanning-tree portfast Port-channel channel-idRange Command Mode Spanning-tree protocol-migrationAuto Syntax Spanning-tree protocol-migration interface Syntax Show spanning-tree interface This command shows the configuration for the spanning treeShow spanning-tree 148 Vlan Commands 51 VLANs Command Groups Function52 Editing Vlan Groups Command Function Mode Editing Vlan Groups By default only Vlan 1 exists and is active Vlan Database ConfigurationVlan Show vlan Configuring Vlan Interfaces 53 Configuring Vlan Interfaces Command Function ModeInterface vlan Interface vlan Switchport mode Switchport acceptable-frame-typesAll ports are in hybrid mode with the Pvid set to Vlan Switchport acceptable-frame-types Switchport ingress-filtering Syntax No switchport ingress-filtering Default Setting Switchport native vlan Switchport allowed vlan Displaying Vlan Information Switchport forbidden vlan54 Show Vlan Commands Function Mode This command shows Vlan information Following example shows how to display information for VlanShow vlan Shows all VLANs Configuring Private VLANs 55 Private Vlan Commands Vlan Configuration Private-vlan Private vlan association No private-vlan primary-vlan-idassociation Switchport mode private-vlan Switchport private-vlan host-associationNormal Vlan Secondary-vlan-id- ID of secondary VLAN. Range Switchport private-vlan isolated Isolated-vlan-id- ID of secondary VLAN. Range Syntax Show vlan private-vlan community isolated primary Switchport private-vlan mappingShow vlan private-vlan Gvrp and Bridge Extension Commands 56 Gvrp and Bridge Extension Commands Function ModeSyntax No bridge-ext gvrp Default Setting Bridge-ext gvrp Show bridge-ext Switchport gvrpSyntax No switchport gvrp Default Setting Show gvrp configuration Garp timerThis command shows if Gvrp is enabled Syntax Show gvrp configuration interface Shows all Garp timers Show garp timerSyntax Show garp timer interface Priority Commands Priority Commands Layer57 Priority Commands Command Groups Function 58 Priority Commands Layer Function Mode Syntax Queue mode strict wrr no queue mode Queue modeSwitchport priority default Queue bandwidth weight1...weight3 no queue bandwidth Queue bandwidth 59 Default CoS Priority Levels Queue cos-map Show queue mode This command shows the current queue modeShow queue bandwidth Show queue cos-map Syntax Show queue cos-map interface This command shows the class of service priority mapShow queue cos-map Priority Commands Layer 3 60 Priority Commands Layer 3 Function ModeSyntax No map ip port Default Setting 101 Following example shows how to map Http traffic to CoS value Syntax No map ip precedence Default Setting List below shows the default priority mapping 61 Mapping IP Precedence Values CoS Value Command Mode Priority Commands Map ip dscp Global Configuration Syntax No map ip dscp Default Setting Syntax Show map ip port interface Use this command to show the IP port priority map62 IP Dscp to CoS Vales IP Dscp Value CoS Value Syntax Show map ip precedence interface This command shows the IP precedence priority mapShow map ip precedence Syntax Show map ip dscp interface This command shows the IP Dscp priority mapShow map ip dscp Multicast Filtering Commands Igmp Snooping Commands63 Multicast Filtering Commands Command Groups Function 64 Igmp Snooping Commands Function Mode Syntax No ip igmp snooping Default Setting Following example enables Igmp snoopingIp igmp snooping Ip igmp snooping vlan static Following configures the switch to use Igmp Version This command shows the Igmp snooping configurationIp igmp snooping version Show ip igmp snooping Show mac-address-table multicast Following shows the current Igmp snooping configurationThis command shows known multicast addresses Igmp Query Commands Layer 65 Igmp Query Commands Layer Function ModeSyntax No ip igmp snooping querier Default Setting Ip igmp snooping querier Following shows how to configure the query count to Ip igmp snooping query-intervalTimes Ip igmp snooping query-max-response-time Ip igmp snooping router-port-expire-time Seconds The report delay advertised in Igmp queries. RangeIp igmp snooping query-max-response-time Static Multicast Routing Commands 66 Static Multicast Routing Commands Function ModeIp igmp snooping vlan mrouter Syntax No ip igmp snooping vlan vlan-idmrouter interface Displays multicast router ports for all configured VLANs Show ip igmp snooping mrouterSyntax Show ip igmp snooping mrouter vlan vlan-id Multicast router port types displayed include Static IP Interface Commands 67 IP Interface Commands Function ModeInterface Configuration Vlan Ip address Ip default-gateway Syntax Ip default-gateway gateway no ip default-gatewayGateway IP address of the default gateway Following example defines a default gateway for this device This command submits a Bootp or Dhcp client request This command displays the settings of an IP interfaceIp dhcp restart Show ip interface This command has no default for the host Show ip redirectsPing Syntax Ping host size size count count 194 Appendix a Software Specifications Software Features Standards Management FeaturesGroups 1, 2, 3, 9 Statistics, History, Alarm, Event Management Information Bases Software Specifications Table B-1 Troubleshooting Chart Symptom Action Using System Logs Access Control List ACL Boot Protocol BootpClass of Service CoS Differentiated Services Code Point Service Dscp Garp Vlan Registration Protocol Gvrp Generic Attribute Registration Protocol GarpGeneric Multicast Registration Protocol Gmrp Group Attribute Registration Protocol Garp Igmp Snooping Igmp QueryInternet Group Management Protocol Igmp In-Band Management Multicast Switching Port AuthenticationRemote Authentication Dial-in User Service Radius MD5 Message-Digest Algorithm Remote Monitoring Rmon Rapid Spanning Tree Protocol RstpSecure Shell SSH Simple Network Management Protocol Snmp XModem User Datagram Protocol UDPVirtual LAN Vlan Downloading software 3-16 Gateway, default 3-12,4-191Numerics Index Index-3 Index-4 Page GSW-2692 E072006-R01