LevelOne GSW-2692 manual Displaying Switch Hardware/Software Versions

		Basic Configuration
			3
CLI – Specify the hostname, location and contact information.
Console(config)#hostname R&D 5		4-25
Console(config)#snmp-server location WC 9		4-104
Console(config)#snmp-server contact Ted		4-104
Console(config)#exit
Console#show system		4-62
System description: GSW-2692 Layer2 Stackable Intelligent Switch
System OID string: 1.3.6.1.4.1.22426.1.4.2
System information
System Up time:	0 days, 2 hours, 4 minutes, and 7.13 seconds
System Name:	R&D 5
System Location:	WC 9
System Contact	Ted
MAC address	00-30-F1-OC-2E-C0
Web server:	enabled
Web server port:	80
Web secure server:	enabled
Web secure server port: 443
Telnet server:	enabled
Telnet port:	23
Jumbo Frame:	Disabled
POST result
DUMMY Test 1.................PASS
UART LOOP BACK Test..........PASS
DRAM Test....................PASS
Timer Test...................PASS
RTC Initialization...........PASS
Switch Int Loopback test.....PASS
Done All Pass.
Console#

Displaying Switch Hardware/Software Versions

Use the Switch Information page to display hardware/firmware version numbers for the main board and management software, as well as the power status of the system.

Field Attributes

Main Board

•Serial Number – The serial number of the switch.

•Number of Ports – Number of built-in RJ-45 ports.

•Hardware Version – Hardware version of the main board.

•Internal Power Status – Displays the status of the internal power supply.

Management Software

•Loader Version – Version number of loader code.

•Boot-ROM Version – Version of Power-On Self-Test (POST) and boot code.

•Operation Code Version – Version number of runtime code.

•Role – Shows that this switch is operating as Master or Slave.

Expansion Slot

• Expansion Slot 1/2 – Combination RJ-45/SFP ports.

3-9