LevelOne GSW-2692 manual Show map access-list mac, Egress Queue Priority Mapping

Access Control List Commands 4

Command Mode

Interface Configuration (Ethernet)

Command Usage

•You must configure an ACL mask before you can map CoS values to the rule.

•A packet matching a rule within the specified ACL is mapped to one of the output queues as shown below.

Table 4-37 Egress Queue Priority Mapping

Queue	0	1	2	3
Priority	1,2	0,3	4,5	6,7

Example

Console(config)#int eth 1/5

Console(config-if)#map access-list mac jerry cos 0

Console(config-if)#

Related Commands

queue cos-map (4-171)

show map access-list mac (4-101)

show map access-list mac

This command shows the CoS value mapped to a MAC ACL for the current interface. (The CoS value determines the output queue for packets matching an ACL rule.)

Syntax

show map access-list mac [interface]

interface

•ethernet unit/port

-unit - Stack unit. (Range: 1-8)

-port - Port number.

Command Mode

Privileged Exec

Example

Console#show map access-list mac Eth 1/5

access-list mac jerry cos 0 Console#

Related Commands

map access-list mac (4-100)

4-101