LevelOne GSW-2692 manual Adding Static Members to VLANs Port Index, Vlan Static Membership by Port

3 Configuring the Switch

Adding Static Members to VLANs (Port Index)

Use the VLAN Static Membership by Port menu to assign VLAN groups to the selected interface as a tagged member.

Command Attributes

•Interface – Port or trunk identifier.

•Member – VLANs for which the selected interface is a tagged member.

•Non-Member– VLANs for which the selected interface is not a tagged member.

Web – Open VLAN, 802.1Q VLAN, Static Membership by Port. Select an interface from the scroll-down box (Port or Trunk). Click Query to display membership information for the interface. Select a VLAN ID, and then click Add to add the interface as a tagged member, or click Remove to remove the interface. After configuring VLAN membership for each interface, click Apply.

Figure 3-65 VLAN Static Membership by Port

CLI – This example adds Port 3 to VLAN 1 as a tagged port, and removes Port 3 from VLAN 2.

Console(config)#interface ethernet 1/3		4-108
Console(config-if)#switchport allowed	vlan add 1 tagged	4-155
Console(config-if)#switchport allowed	vlan remove 2

3-114