LevelOne GSW-2692 manual User Access Commands, Syntax Hostname name no hostname

System Management Commands 4

Example

Console(config)#prompt RD2

RD2(config)#

hostname

This command specifies or modifies the host name for this device. Use the no form to restore the default host name.

Syntax

hostname name no hostname

name - The name of this host. (Maximum length: 255 characters)

Default Setting

None

Command Mode

Global Configuration

Example

Console(config)#hostname RD#1

Console(config)#

User Access Commands

The basic commands required for management access are listed in this section. This switch also includes other options for password checking via the console or a Telnet connection (page 4-10), user authentication via a remote authentication server (page 4-71), and host access authentication for specific ports (page 4-81).

Table 4-9 User Access Commands

Command	Function	Mode	Page
username	Establishes a user name-based authentication system at login	GC	4-26
enable password	Sets a password to control access to the Privileged Exec level	GC	4-27

4-25