LevelOne GSW-2692 manual Show queue mode, Show queue bandwidth, Show queue cos-map

4 Command Line Interface

Command Usage

•CoS values assigned at the ingress port are also used at the egress port.

•This command sets the CoS priority for all interfaces.

Example

The following example shows how to map CoS values 0, 1 and 2 to egress queue 0, value 3 to egress queue 1, values 4 and 5 to egress queue 2, and values 6 and 7 to egress queue 3:

Console(config)#interface ethernet					1/1
Console(config-if)#queue				cos-map 0	0	1	2
Console(config-if)#queue				cos-map 1	3
Console(config-if)#queue				cos-map 2	4	5
Console(config-if)#queue				cos-map 3	6	7
Console(config-if)#end
Console#show queue		cos-map ethernet 1/1
Information of Eth		1/1
CoS Value	: 0	1 2	3	4 5 6 7
Priority Queue: 0		0 0	1	2 2 3 3
Console#

Related Commands

show queue cos-map (4-173)

show queue mode

This command shows the current queue mode.

Default Setting

None

Command Mode

Privileged Exec

Example

Console#show queue mode

Queue mode: wrr

Console#

show queue bandwidth

This command displays the weighted round-robin (WRR) bandwidth allocation for the four priority queues.

Default Setting

None

Command Mode

Privileged Exec

4-172