Lexmark 640, 644, 642 manual Loading the envelope feeder

Printing

Loading the envelope feeder

The optional envelope feeder can accept a variety of envelope sizes. However, the envelope feeder must be adjusted correctly to ensure trouble-free printing. To load the envelope feeder:

1Adjust the envelope support for the length of envelope you are loading.

•Fully closed (pushed in toward the printer) for short envelopes

•Extended to the middle position for medium-length envelopes

•Fully open (extended to its full length) for long envelopes

Warning: Do not place objects on the envelope feeder. Avoid pressing down on it or applying excessive force.

2Lift the envelope weight back toward the printer. It stays in place.

3Slide the width guide to the far right.

4Flex a stack of envelopes back and forth, and then straighten the edges on a level surface. Press down the corners to flatten them.

Fan the envelopes. This prevents the edges of the envelopes from sticking together and helps them feed properly.

Loading the envelope feeder

55