Lexmark 642, 644, 640 manual Linking output bins

Printing

	Each bin accommodates			How many
				can be	Bin is
Output				installed on	allowed to
bin name	Print media		Printer Models	the printer	connect with Illustration of output bin
Output	•	650 sheets	T640	3	1 5-bin
expander		(75 g/m2) of plain	T642		mailbox, 1
		paper	T644		high-capacity
	•	50 envelopes			output stacker,
		(75 g/m2)			or 1 finisher*

5-bin	120 sheets	T642	2	1 output
mailbox	(75 g/m2) of plain paper	T644		expander or 1
	for each of the five bins			finisher*
	for a total of 600 for all
	bins

* See the instructions that came with the option for information on how to install options in relation to each other.

Linking output bins

Linking output bins lets you create a single output source so the printer can automatically switch output to the next available bin. You can also set the output type for media such as card stock or envelope sizes that cannot be sent to an optional output bin. For more information on the values available to configure your output bins, see the Menus and Messages Guide.

Note: The bin sequence for linking always starts with the Standard Bin and proceeds from the bin nearest to the floor to the bin farthest from the floor.

To link output bins:

1Press on the operator panel.

2Press until the appears next to Paper Menu, and then press

3Press until the appears next to Bin Setup, and then press .

4Press until the appears next to Configure Bins, and then press .

5Press until the appears next to Link, and then press . The printer returns to Ready.

Identifying and linking output bins

59