Lexmark W850 manual Flash Drive menu, Understanding printer menus 117, Paper Source, Staple

Understanding printer menus 117

Flash Drive menu

Menu item	Description
Copies	Specifies a default number of copies for each print job
1–999	Note: 1 is the factory default setting.
Paper Source	Sets a default paper source for all print jobs
Tray <x>	Note: Tray 1 (standard tray) is the factory default setting.
MP Feeder
Manual Paper
Manual Env
Collate	Stacks the pages of a print job in sequence when printing multiple copies
Off (1,1,1,2,2,2)	Note: On is the factory default setting.
On (1,2,1,2,1,2)
Sides (Duplex)	Controls whether the job prints on one side or both sides of the paper
2 sided	Note: One‑sided is the factory default setting.
1 sided
Staple	Specifies whether print jobs are stapled
Off	Note: Off is the factory default setting.
Auto
Front
Back
Dual
Hole Punch	Specifies whether a hole punch is applied to print jobs
Off	Notes:
On
	• This menu item is available only when a finisher with Hole Punch is installed.
	• Off is the factory default setting.
Hole Punch Mode	Specifies the number of hole punches in print jobs
2, 3	Notes:

2, 4

•This menu item is available only when a finisher with Hole Punch is installed.

•The values of 2 and 3 are displayed only when the 3 Hole Finisher, that can also be used for 2 holes, is installed. 3 is the factory default setting.

•The values of 2 and 4 are displayed only when the 4 Hole Finisher, that can also be used for 2 holes, is installed. 4 is the factory default setting.

•The 3 hole finisher allows the user to select 2 or 3 hole punch.

•The 4 hole finisher allows the user to select 2 or 4 hole punch.