Lexmark W850 manual Click System From the Hardware tab, click Device Manager

Additional printer setup 41

The serial parameters in the COM port must match the serial parameters you set in the printer.

aOpen the Device Manager:

In Windows Vista

1Click .

2Click Control Panel.

3Click System and Maintenance.

4Click System.

5Click Device Manager.

In Windows XP

1Click Start.

2Click Control Panel.

3Click Performance and Maintenance.

4Click System.

5From the Hardware tab, click Device Manager.

In Windows 2000

1Click Start.

2Click Settings > Control Panel.

3Click System.

4From the Hardware tab, click Device Manager.

bClick + to expand the list of available ports.

cSelect the communications port where you attached the serial cable to your computer (example: COM1).

dClick Properties.

eOn the Port Settings tab, set the serial parameters to the same serial parameters in the printer. Look for the printer settings under the serial heading on the Menu Settings page you printed earlier.

fClick OK, and then close all the windows.

gPrint a test page to verify printer installation. When a test page prints successfully, printer setup is complete.