Lexmark W850 manual Cartridge part number unsupported by device, Short paper, Troubleshooting 145

Troubleshooting 145

32 Cartridge part number unsupported by device

Remove the print cartridge, and then install a supported one.

34 Short paper

Try one or more of the following:

•Load the appropriate paper in the tray.

•Press the up or down arrow button until Continue appears, and then press to clear the message and print the job using a different paper tray.

•Check tray length and width guides and make sure the paper is properly loaded in the tray.

•For Windows users, check the Print Properties settings to make sure the print job is requesting the correct paper size and type.

For Macintosh users, check the Print dialog settings to make sure the print job is requesting the correct paper size and type.

•Check that the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, make sure the paper is large enough for the data being printed.

•Cancel the current print job. Press the up or down arrow button until Cancel job appears, and then press .

34 Incorrect media, check <input src> guides

Try one or more of the following:

•Load the appropriate paper or other specialty media in the tray.

•Press the up or down arrow button until Continue appears, and then press to clear the message and print the job using a different tray.

35 Insufficient memory to support Resource Save feature

Try one or more of the following:

•Press the up or down arrow button until Continue appears, and then press to disable Resource Save and continue printing.

•To enable Resource Save after receiving this message, make sure the link buffers are set to Auto, and then exit the menus to activate the link buffer changes. When Ready appears, enable Resource Save.

•Install additional memory.