Lexmark W850 Load Manual Feeder with Custom String, Load Manual Feeder with size, Load staples

Troubleshooting 143

Load Manual Feeder with <Custom String>

Try one or more of the following:

•Load the multipurpose feeder with the correct paper type and size.

•Ignore the request and print on paper that is already being used in one of the trays. Press the up or down arrow

button until Automatically select paper appears, and then press .

If the printer finds a tray that has paper of the correct type, it uses the paper from that tray. If the printer cannot find a tray with the correct paper type, it prints on the paper that is installed in the default paper source.

•Cancel the print job. Press the up or down arrow button until Cancel job appears, and then press .

Load Manual Feeder with <size>

Try one or more of the following:

•Load the multipurpose feeder with the correct paper size.

If there is no paper in the multipurpose feeder, then feed a sheet of paper to clear the message.

•Ignore the request and print on paper that is already being used in one of the input sources. Press the up or down

arrow button until Automatically select appears, and then press .

If the printer finds a source that has paper of the correct type, it uses the paper from that source. If the printer cannot find a source with the correct paper type, it prints on the paper that is installed in the default paper source.

•Cancel the print job. Press the up or down arrow button until Cancel job appears, and then press .

Load Manual Feeder with <type> <size>

Try one or more of the following:

•Load the correct paper type and size in the multipurpose feeder.

•Ignore the request and print on paper that is already being used in one of the input sources. Press the up or down

arrow button until Automatically select appears, and then press . The current job may not print correctly.

If the printer finds a source that has paper of the correct type, it uses the paper from that source. If the printer cannot find a source with the correct paper type, it prints on the paper that is installed in the default paper source.

•Cancel the print job. Press the up or down arrow button until Cancel job appears, and then press .

Load staples

Try one or more of the following:

•Replace the specified staple cartridge in the finisher.

•Press the up or down arrow button until Continue appears, and then press to clear the message and continue printing.

•Cancel the print job. Press the up or down arrow button until Cancel job appears, and then press .