Lexmark W850 manual Checking the status of supplies, Ordering supplies, Part numbers

Maintaining the printer 122

Checking the status of supplies

A message appears on the display when a replacement supply item is needed or when maintenance is required.

Checking the status of supplies from the printer control panel

1Make sure the printer is on and Ready appears.

2From the printer control panel, press the up or down arrow button until Status/Supplies appears, and then

press .

3Press the up or down arrow button until View supplies appears, and then press . The status of each supply appears.

Checking the status of supplies from a network computer

Note: The computer must be connected to the same network as the printer.

1Type the printer IP address into the address field of your Web browser.

Note: If you do not know the IP address of the printer, print a network setup page and locate the IP address in the TCP/IP section.

2Click Device Status. The Device Status page appears, displaying a summary of supply levels.

Ordering supplies

To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies dealers in your area. In other countries or regions, visit the Lexmark Web Site at www.lexmark.com or contact the place where you purchased the printer.

Note: All life estimates for printer supplies assume printing on letter‑ or A4‑size plain paper.

Part numbers

Part name	Part number	For printer
Toner Cartridge	W850H21G	W850
Photoconductor Kit	W850H22G	W850
Maintenance kit (low voltage)	40X0956	W850
Maintenance kit (high voltage)	40X0957	W850
Maintenance kit (100 volt)	40X0958	W850
Staple Cartridge	25A0013	W850

Ordering a toner cartridge

When 88 Cartridge low appears, order a new cartridge.