Lexmark W850 manual Network Card menu, TCP/IP menu

Understanding printer menus 91

Menu item	Description
Print Setup Page	Prints a report containing information about the current network setup
Print NetWare Setup	Notes:
Page	• The Setup Page contains information about the network printer settings, such as the
	TCP/IP address.
	• The NetWare Setup Page menu item appears only on models that support NetWare and
	shows information about NetWare settings.

Network Card menu

This menu is available from the Network/Ports menu:

Network/Ports > Standard Network or Network <x> > Std Network Setup or Net <x> Setup > Network Card

Menu item	Description
View Card Status	Lets you view the connection status of the Network Card
Connected
Disconnected
View Card Speed	Lets you view the speed of a currently active network card
Network Address	Lets you view the network addresses
UAA
LAA
Job Timeout	Sets the amount of time in seconds that a network print job can take before it
0‑225 seconds	is canceled
	Notes:
	• 90 seconds is the factory default setting.
	• A setting value of 0 disables the timeout.
	• If a value of 1–9 is selected, then the setting is saved as 10.
Banner Page	Allows the printer to print a banner page
Off	Note: Off is the factory default setting.
On

TCP/IP menu

Use the following menu items to view or set the TCP/IP information.

Note: This menu is available only for network models or printers attached to print servers. This menu is available from the Network/Ports menu:

Network/Ports > Standard Network or Network <x> > Std Network Setup or Net <x> Setup > TCP/IP