Lexmark W850 manual Printing from a flash drive, For Macintosh users

Printing 70

For Macintosh users

1With a document open, choose File > Print.

If necessary, click the disclosure triangle to see more options.

2From the print options or Copies & Pages pop‑up menu, choose Job Routing.

3Select your job type (Confidential, Repeat, Reserve, or Verify), and then assign a user name. For a confidential job, also enter a four‑digit PIN.

4Click OK or Print, and then go to the printer to release the job.

5From the printer control panel, press the up or down arrow button until Held jobs appears, and then press .

6Press the up or down arrow button until appears next to your user name, and then press .

7Press the up or down arrow button until appears next to the job type or job name, and then press . If you selected a job name, proceed to step 10 on page 70.

8After selecting your job type, use the keypad to enter your PIN. If you enter an invalid PIN, the Invalid PIN screen appears.

•To re‑enter the PIN, make sure Try again appears, and then press .

•To cancel the PIN, press the up or down arrow button until Cancel appears, and then press .

9Press the up or down arrow button until appears next to the job you want to print, and then press .

10Press the up or down arrow button until appears next to the number of copies you want to print, and then press .

Note: Use the keypad to enter a number if necessary.

Printing from a flash drive

A USB port is located on the printer control panel. Insert a flash drive to print supported file types. Supported file types include: .pdf, .gif, .jpeg, .jpg, .bmp, .png, .tiff, .tif, .pcx, .xps, and .dcx.

Lexmark has tested and approved the following USB flash memory devices:

•Lexar FireFly 512 MB

•Lexar FireFly 1 GB

•SanDisk Cruizer Micro 512 MB

•SanDisk Cruizer Micro 1 GB

•Sony 512 MB

•Sony 1 GB

Notes:

•High‑speed flash drives must support the full‑speed USB standard. Flash drives supporting only USB low‑speed capabilities are not supported.